answersLogoWhite

0

A 26 Baume NaOH solution has a concentration of approximately 30.9% NaOH by weight. The Baume scale is used to measure the density of a solution, with 26 Baume corresponding to this specific concentration of sodium hydroxide.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

How much 66 baume sulfuric acid is required to neutralize 350lbs of sodium hydroxide?

66 Baume Sulfuric Acid is contains 93.2% H2SO4 by weight in water. It requires 1 lbmol of H2SO4 to neutralize 2 lbmol of NaOH. Assuming that 350 lbs of NaOH is pure, there are 8.75 lbmol of NaOH. (Divide 350lb by 40 lb/lbmol, the MW of NaOH.) It takes 4.375 lbmol of H2SO4 to neutralize the 350 lb of NaOH because there are 2 lbmol of H per lbmol of H2SO4 and one lbmol of OH per lbmol of NaOH. 4.375 lbmol is equivalent to 428.75 lb of H2SO4. (Multiply by 98 lb/lbmol, the MW of H2SO4.) Then divide by 93.2% or 0.932 to get the quanty of 66 Baume containing 428.75 lb of H2SO4. 460 lb of 66 Baume. The density of 66 Baume is 1.8354 g/cm3 which is equivalent to 15.32 lb/gallon. (Mulitply by 8.345.) Finally, it requires 30 gallons of 66 baume to neutralize 350 lbs of NaOH. (Divide 460 by 15.32.)


What is the degree Baume of 40 percent HCl?

The Baume scale for hydrochloric acid ranges from 35-45 Baume degrees for a 40% concentration. Therefore, the degree Baume of 40% HCl would fall within this range.


What is the concentration of 38 Baume sodium hydroxide?

38° Bé Sodium Hydroxide NaOH SG = 145 / ( 145 - Bé ) = 145 / ( 145 - 38 ) = 145 / 107 = 1.355 If you look at the data of Sodium Hydroxide you will see that a S.G of 1.355 represents a concentration of approx. 33 % Weight


When NaH is added to water the hydroxide concentration increases what can you include about NaOH?

The premise of this question is incorrect. When NaOH is added to water the hydroxide concentration increases. NaOH is a base. If a substance decreases hydroxide concentration it would be an acid.


What volume of NaOH was used in the titration?

To determine the volume of NaOH used in the titration, you need to know the concentration of the NaOH solution and the volume required to reach the endpoint. Use the formula: volume NaOH (L) = volume HCl (L) * concentration HCl / concentration NaOH.

Related Questions

How much 66 baume sulfuric acid is required to neutralize 350lbs of sodium hydroxide?

66 Baume Sulfuric Acid is contains 93.2% H2SO4 by weight in water. It requires 1 lbmol of H2SO4 to neutralize 2 lbmol of NaOH. Assuming that 350 lbs of NaOH is pure, there are 8.75 lbmol of NaOH. (Divide 350lb by 40 lb/lbmol, the MW of NaOH.) It takes 4.375 lbmol of H2SO4 to neutralize the 350 lb of NaOH because there are 2 lbmol of H per lbmol of H2SO4 and one lbmol of OH per lbmol of NaOH. 4.375 lbmol is equivalent to 428.75 lb of H2SO4. (Multiply by 98 lb/lbmol, the MW of H2SO4.) Then divide by 93.2% or 0.932 to get the quanty of 66 Baume containing 428.75 lb of H2SO4. 460 lb of 66 Baume. The density of 66 Baume is 1.8354 g/cm3 which is equivalent to 15.32 lb/gallon. (Mulitply by 8.345.) Finally, it requires 30 gallons of 66 baume to neutralize 350 lbs of NaOH. (Divide 460 by 15.32.)


What is the degree Baume of 40 percent HCl?

The Baume scale for hydrochloric acid ranges from 35-45 Baume degrees for a 40% concentration. Therefore, the degree Baume of 40% HCl would fall within this range.


20ml of acetic acid is titrated with a solutuion of 0.15 m naoh if 35 ml of naoh are required to reach the equivalence point what is the concentration of the acetic acid solution?

.26


What is the concentration of 38 Baume sodium hydroxide?

38° Bé Sodium Hydroxide NaOH SG = 145 / ( 145 - Bé ) = 145 / ( 145 - 38 ) = 145 / 107 = 1.355 If you look at the data of Sodium Hydroxide you will see that a S.G of 1.355 represents a concentration of approx. 33 % Weight


When NaH is added to water the hydroxide concentration increases what can you include about NaOH?

The premise of this question is incorrect. When NaOH is added to water the hydroxide concentration increases. NaOH is a base. If a substance decreases hydroxide concentration it would be an acid.


What volume of NaOH was used in the titration?

To determine the volume of NaOH used in the titration, you need to know the concentration of the NaOH solution and the volume required to reach the endpoint. Use the formula: volume NaOH (L) = volume HCl (L) * concentration HCl / concentration NaOH.


Does HCl change in concentration when neutralized with NaOH?

Yes, when HCl is neutralized with NaOH, the concentration of HCl decreases as it reacts with NaOH to form water and NaCl. The concentration of the resulting NaCl solution will increase as the reaction progresses.


What is the definition of 67 Baume sulfuric acid?

A baume is a unit to based on specific gravity of a substance. The Formula is as followed : Sg=145÷(145-oB) Sg= Specific gravity solving the equation Sg=1.859, which for sulphuric acid maybe a little tricky


A solution is prepared by mixing 360.0 mL of 0.25 M NaOH with 140.0 mL of 0.50 M NaOH and the final concentration is?

The concentration is 12,8 g/L NaOH.


Why is it necessary to standardize the NaOH solution before titration?

Standardizing the NaOH solution before titration is important to accurately determine its actual concentration. This ensures the accuracy and reliability of the titration results by eliminating any discrepancies that may arise from variations in the concentration of the NaOH solution.


How do you calculate of NaOH in solution procedure?

To calculate the concentration of NaOH in a solution, you would typically measure the volume of the solution and the amount of NaOH used to prepare it. Then, you can use the formula: Concentration (in mol/L) = amount of NaOH (in mol) / volume of solution (in L) to determine the concentration. Make sure to convert any given amount of NaOH from grams to moles before calculating.


How to standardize 0.1N NaoH?

Because NaOH is hygroscopic, meaning it absorbs water from the air, NaOH cannot be accurately weighed. To standardize 0.1 M NaOH, a solution is made to an approximate concentration of 0.1 M and then standardized by titrating an accurately weighed quantity of a primary standard.