V1M1 = V2M2
(x L)(6.00M) = (0.5 L)(3M)
x = 0.25 liters (250 mls)
Double the volume of the 10X stock and you will have a 5X stock.Half the volume of your 5X soln will be from the 10X stock.
Dear friends, PPM means Part Per Millions, So It means if you takes 1 gm of Solid Chloride Ions and Dissolve it in D. water. The Current Stock solution is having 1000 PPM of Chloride Ions. NOW if you want lesser PPM solution from this stock Solution, follows below rule- Required PPM Solution (A) ---------------------------------- X Required Volume of A PPM solution === Nos. of mL Stock Solution PPM (1000) to be taken from this stock solution and add in required Volume. Dr.P.Khemariya Research Scientist R&D dr.p.khemariya@gmail.com
To make a 10 volume developer solution from a 20 volume developer solution, you can dilute the 20 volume developer with an equal amount of distilled water. This will effectively reduce the concentration of the developer solution by half, resulting in a 10 volume developer. For example, if you have 100 ml of 20 volume developer, you would mix it with 100 ml of distilled water to create 200 ml of 10 volume developer.
50% by volume.
Your question does not make sense, an almost infinite amount of solution could be prepared if desired
Double the volume of the 10X stock and you will have a 5X stock.Half the volume of your 5X soln will be from the 10X stock.
Keep diluting it up to a trillion times larger volume than your stock solution
The volume is 0,3 mL.
M1*V1 = M2*V2 2.00 M * V1 = 0.50 M * 150 mL V1 = 37.5 mL = 37.5 * 10^-3 = 0.038 L
You need 6,9 mL stock solution.
20 volume is 6% solution. To make it 3% solution just add same volume of water to the original 6% solution and you have double volume of 3% solution.
Dear friends, PPM means Part Per Millions, So It means if you takes 1 gm of Solid Chloride Ions and Dissolve it in D. water. The Current Stock solution is having 1000 PPM of Chloride Ions. NOW if you want lesser PPM solution from this stock Solution, follows below rule- Required PPM Solution (A) ---------------------------------- X Required Volume of A PPM solution === Nos. of mL Stock Solution PPM (1000) to be taken from this stock solution and add in required Volume. Dr.P.Khemariya Research Scientist R&D dr.p.khemariya@gmail.com
To make a 10 volume developer solution from a 20 volume developer solution, you can dilute the 20 volume developer with an equal amount of distilled water. This will effectively reduce the concentration of the developer solution by half, resulting in a 10 volume developer. For example, if you have 100 ml of 20 volume developer, you would mix it with 100 ml of distilled water to create 200 ml of 10 volume developer.
1 part of stock+ 2part of dillution
Take 5 grams of calcium chloride and dissolve it in 100ml of solution to get a 5% solution of calcium chloride. The standard way to make a weight-volume solution is to take grams of the dry substance in 100ml of volume.
To prepare 6 nM ammonium hydroxide a 30 percent solution you need to know the volume of the 30 percent solution that you have and the volume of 6nM solution you would like to make. Then use the following formula: C1V1 = C2V2 where C = concentration in moles/Liter and V = volume in liters.
Calculate the weight of sucrose for the desired volume and concentration of the solution.