0
What else can I help you with?
What would you do to some strong acid spilt onto the laboratory bench if you want to make it safe?
To safely neutralize a spill of strong acid on a laboratory bench, you should first alert others in the area and put on appropriate personal protective equipment. Use a neutralizing agent like baking soda or a commercial acid spill kit to carefully absorb and neutralize the acid. After neutralizing the spill, clean the area thoroughly with water and dispose of any contaminated materials according to proper hazardous waste disposal guidelines.
What would you do if you spilt strong acid on laboratory bench?
There are many different kinds of acid, some being more dangerous than others (Prussic Acid is the most dangerous - you'd better not spill that one) and there are many different places in which acid can be spilled in a lab, so as a result, there are many different things that can happen.When concentrated acid is to be used, please first read the lab procedures on 'What to do and what not to do' when working dangerous chemicals BEFORE working with them.Only if you're sure or well qualified lab worker, you may clean up diluted acid by further dilution, rinsing and finally wiping up the spill. In some cases you can neutralise with some bicarbonate solution (also used for handwashing after cleanup).In some cases, spilling acid in a lab has no greater consequences than spilling coffee in your kitchen. You may have to wipe it up.
Is acetic acid bad or good?
Acetic acid is commonly known as vinegar. It depends on what you are using it for as to whether it is good or bad. Personally, I love balsamic vinaigrette salad dressing, so I would say it is good. As to it's properties, acetic acid is a weak acid, meaning it will not burn you if you spill it, unlike HCl or H2SO4. Of course, if you are in a lab, you should still wear gloves, etc.
What are some alternatives to Clorox floor cleaner?
Some alternatives to Clorox floor cleaner include vinegar and water solution, baking soda paste, or eco-friendly floor cleaning products like Method or Mrs. Meyer's. These options are effective at cleaning without the harsh chemicals found in some traditional cleaners.
Why were carboys more dangerous for transporting sulphuric acid?
Carboys were more dangerous for transporting sulfuric acid because they were made of glass, which could break easily and spill the corrosive acid. The glass was also heavy and prone to shattering under stress, making them hazardous to handle. Additionally, carboys were often sealed with cork stoppers, which could degrade in contact with sulfuric acid, leading to leaks or spills.
What would happen if you spill pickle juice on a subway bus in France?
There will be some vinegar smell, the floor will get wet and dirty. Nothing more.
What would you do to some strong acid spilt onto the laboratory bench if you want to make it safe?
To safely neutralize a spill of strong acid on a laboratory bench, you should first alert others in the area and put on appropriate personal protective equipment. Use a neutralizing agent like baking soda or a commercial acid spill kit to carefully absorb and neutralize the acid. After neutralizing the spill, clean the area thoroughly with water and dispose of any contaminated materials according to proper hazardous waste disposal guidelines.
Why can't a mini sub fix the Gulf oil spill?
The spill originates 13,000 ft below the sea floor. A blow out has an incredible force coming out of the well bore. Sitting a small sub on top of a 40 ft high blow out preventer would buckle the well, destroy the cement seal in place, and fracture the formation. Oil would be coming out all over the ocean floor. Similar results could be acheived by using bombs as some have suggested. The oil spill is huge, but there are a number of ideas out there which could make the spill 100 times worse.
What is the best type of garage floor coatings?
There are some rubberized tiles that you can put down in a garage. They allow you to spill oil and other liquids and then simply remove and wash or replace certain areas of the floor.
What are some examples that would be considered an acid?
Some examples that would be considered an acid: sulfuric acid, nitric acid, hydrofluoric acid, perchloric acid, boric acid, periodic acid, salicilic acid, stearic acid, citric acid, oxalic acid, etc.
What effect will battery acid have on the rubber hoses in your car?
Sulfuric acid attacks and degrades Buna-N rubber. As to the possibility it can damage a rubber hose, I would not take any chances. Rinse all spilled electrolyte off the area you spill it on thoroughly. You can also pour some baking soda on the area to neutralize the acid.
How should one care for their engineered wood floor?
If you have an engineered wood floor here are some tips for proper care. For a spill, clean up as soon as possible as they should not be exposed to moisture for very long. Sweep regularly to prevent the floor from scratches. Use a rug to help protect the floor.
if some soap falls on the floor, would it be dirty, or would the floor be clean?
the soap would be dirty, because there is just not enough soap to clean the entire floor.
When would the desity of oil and water be important?
when there is an oil spill in oceans or any liquid of some source
Why soda cans are not filled to the top?
They are not filled to the top cause, then it would spill. (But some people would like it filled to the top)
What would you do if you spilt strong acid on laboratory bench?
There are many different kinds of acid, some being more dangerous than others (Prussic Acid is the most dangerous - you'd better not spill that one) and there are many different places in which acid can be spilled in a lab, so as a result, there are many different things that can happen.When concentrated acid is to be used, please first read the lab procedures on 'What to do and what not to do' when working dangerous chemicals BEFORE working with them.Only if you're sure or well qualified lab worker, you may clean up diluted acid by further dilution, rinsing and finally wiping up the spill. In some cases you can neutralise with some bicarbonate solution (also used for handwashing after cleanup).In some cases, spilling acid in a lab has no greater consequences than spilling coffee in your kitchen. You may have to wipe it up.
What would happen if you zinc into hydrohloric acid?
you would get Zinc Chloride, a salt. This is because when you add a metal to an acid, you get a salt (plus some water, which just dilutes the acid)
