0
What else can I help you with?
What is the waste gas produced in the blast furnace?
The waste gas produced in the blast furnace is primarily carbon dioxide (CO2) along with other gases such as carbon monoxide (CO), sulfur dioxide (SO2), and nitrogen oxides (NOx).
What is the affect solution loss reaction in blast furnace?
solution loss reaction is occured in stack region , here CO2 react with solid C and give CO then it will good in term of producing reducing gas but at the same time it losses carbon in stack region which affected the permeability bed of coke and whole blast furnace operation depends on it .
Which exothermic reaction causes the temperature to rise in the blast furnace in reduction of hematite using coke in the blast furnace?
The exothermic reaction that causes the temperature to rise in the blast furnace during the reduction of hematite using coke is the combustion of carbon (C) in coke with oxygen (O2) to produce carbon dioxide (CO2) and release heat energy. This reaction helps maintain the high temperatures necessary for the reduction of hematite to iron.
Is a blast furnace oxidation?
NO!!! Its primary purpose is to REDUCE iron ore to iron. Iron ore is the commercial name for iron(III)oxide ( Ferric Oxide). (Fe2O3) In the Blast Furnace , carbon forms carbon monoxide. , from the coke(carbon) and oxygen ( hot air blast). 2C + O2 = 2CO CO(carbon monoxide) is a very good reducing agent. Hence Fe2O3 + 3CO = 2Fe + 3CO2 The CO2 is not released into the atmosphere, but undergoes reduction to form more CO. NB THere are many more secondary reactions going on in the Blast Furnace.
Can carbon monoxide be involved in the extraction of iron from hematite?
No, carbon monoxide is not typically used in the extraction of iron from hematite. Instead, the reduction of hematite to iron is commonly done using carbon (in the form of coke) in a blast furnace to produce pig iron.
What is the German word for blast furnace?
Blast furnace = Hochofen
What is the waste gas produced in the blast furnace?
The waste gas produced in the blast furnace is primarily carbon dioxide (CO2) along with other gases such as carbon monoxide (CO), sulfur dioxide (SO2), and nitrogen oxides (NOx).
What is Blast Furnace?
A blast furnace is used to extract iron from its ore.
Why blast furnace called as blast furnace?
Its because air is forced into the furnace to increase temperature. Steve.
When was Govăjdia Blast Furnace created?
Govăjdia Blast Furnace was created in 1810.
What is the device that removes impurities from iron?
The most important one is the blast furnace.
What Is A Blast Furnace?
A blast furnace is a forge in which ore is smelted to meal, being intensified by a blast of hot air.
How does limestone coke and iron ore get into the blast furnace?
through the top of the blast furnace
Where is the Largest blast furnace of Asia?
'i' blast furnace of tata steel, jamshedpur,india
What do you all a furnace in a factory?
A blast furnace.
How is slag collected from a blast furnace?
iron is collected from blast furnace by drilling the taphole.Taphole is a hole drill and plug after cycle of time located in blast furnace bottom.
What is the volume of a blast furnace?
Useful Volume of Blast Furnace is the volume of the furnace from the throat level to the level where the taphole is placed. This is known the way basically because that is the region where the useful products from Blast furnace are present.
