By adding HCl, you can ensure the presence of the SO4(2-) ion.
Adding NaOH to the mixture before taking the polarimeter reading is to ensure that the compound is in its deprotonated form, which helps in obtaining accurate measurements of specific rotations. NaOH helps to neutralize any acidic impurities that could affect the optical activity of the compound, leading to more reliable results.
Adding a small amount of NaOH to a buffer solution will increase the pH of the solution. This is because NaOH is a strong base that will react with the weak acid in the buffer, causing the pH to rise.
NaOH is added to water because it is highly exothermic, meaning it releases a significant amount of heat when it dissolves. Adding NaOH to water allows for better control of the heat generated and prevents splattering or boiling of the solution. Additionally, mixing NaOH with water allows the ions to disperse more evenly, resulting in a more homogeneous solution.
To standardize 0.02 N NaOH, you would titrate it against a known concentration of an acid, such as a primary standard like potassium hydrogen phthalate. By carefully adding the NaOH to the acid until the endpoint is reached, you can determine the exact concentration of the NaOH solution.
To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.
Why the NaOH is heated before adding in BaCl2 for determination of purity of NaOH sample?
You dont - adding NaOH increases pH.
Adding NaOH to the mixture before taking the polarimeter reading is to ensure that the compound is in its deprotonated form, which helps in obtaining accurate measurements of specific rotations. NaOH helps to neutralize any acidic impurities that could affect the optical activity of the compound, leading to more reliable results.
Adding a small amount of NaOH to a buffer solution will increase the pH of the solution. This is because NaOH is a strong base that will react with the weak acid in the buffer, causing the pH to rise.
At very high temperature NaOH is decomposed and Na2O fumes are emited.The reaction is:2 NaOH = Na2O = H2O
NaOH is added to water because it is highly exothermic, meaning it releases a significant amount of heat when it dissolves. Adding NaOH to water allows for better control of the heat generated and prevents splattering or boiling of the solution. Additionally, mixing NaOH with water allows the ions to disperse more evenly, resulting in a more homogeneous solution.
Adding NaOH to the mixture before taking the polarimeter reading helps to neutralize any acidic impurities present in the sample, which could affect the accuracy of the polarimeter reading. This step ensures that the sample solution is free from any acidic interference, allowing for a more reliable optical rotation measurement.
To standardize 0.02 N NaOH, you would titrate it against a known concentration of an acid, such as a primary standard like potassium hydrogen phthalate. By carefully adding the NaOH to the acid until the endpoint is reached, you can determine the exact concentration of the NaOH solution.
The chemical equation is:Na + OH- + H+ + Cl- = Na+ + Cl- + H2O(l)
To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.
Standardizing the NaOH solution before titration is important to accurately determine its actual concentration. This ensures the accuracy and reliability of the titration results by eliminating any discrepancies that may arise from variations in the concentration of the NaOH solution.
Heating the NaOH extract before acidification helps to break down any remaining organic compounds that may be present in the solution. This step promotes the complete extraction of the target compound into the aqueous phase and ensures better separation during acidification.