0
The Belmont Barber Chair was one of the best and affordable along with being the most durable chairs, in their time. They are common in certain areas of North America and not common in others. The chairs were very popular in the early 1950's and prior and are still utilized today in many existing Barber Shops both in the USA Canada and Latin America. The chairs are getting rare as Barber Shops are unfortunately closing out, due to forced government regulations and the lack of new Barbers.
Men and some women wanting to be "men only" Barbers must perform female orientated/ related trade hairstylist testing/ apprenticeship and qualifications during their time at trade school. The potential men and women wanting to be solely a Man's Barber are not interested in salon stylist aspect. The trade is therefore not replenished with Barbers and is dying out (very unfortunately).
The value of the Belmont Barber Chair is subject to the following conditions:
If the hydraulics in the center piston are in working order and the chair will stay in an elevated position with an average sized person seated in the chair, this is normally what you would consider to be desirable. The chrome is another point of interest and will normally flake or be scratched near the floor. This is caused by foot/ sweeping impact and cleaning solutions commonly used on floors when cleaning.
The leatherette is another area of concern but can be replaced quite easily. A feature that is sometimes lost from the actual chair is the head rest. These items were normally guarded when the chair was originally in the Barbershop but have been lost in some cases when the chair has been moved or retired. The value of the chair is higher of this back or neck rest is intact. Another item of interest and not available in most cases is the paper roll that fits into the neck rest. These are not easily found in today's day and age.
If all the original parts are in good working order and intact, these chairs can range in price from a minimum of $600.00 to $2000.00 for low to average condition or $2000.00 to approximately $6,000.00 for a prime condition unit.
A prime unit would be unscratched or no flaking/ no worn chrome, no tears original leatherette, perfect hydraulics, shiny aluminum foot rests and of course the neck or back rest in perfect condition with paper. A nice straight blade strop will finish the decor of the chair, if attached. A bonus piece was the child seat, normally a wooden board covered in the same leatherette. Some chairs have a hole right at both chrome hand rests on the chair's arm rests. There were used for small utility or barber tool table or ashtrays that would fit inside these holes. They have a bent piece of metal which fit exactly into the hole and swiveled. These extra items if recovered or are with the chair, can bring the value slightly higher in any event.
What else can I help you with?
How much is belmont barber chair serial number 480D1CCP7?
Belmont barber chair model # 480d1ccp7
How do you add hydraulic oil to an old Belmont barber chair?
To add hydraulic oil to an old Belmont barber chair, locate the nut on the base of the chair down by the foot area. Remove the nut and add the oil by using a small funnel. A Belmont barber chair must not be laid on its side for transporting because the oil will leak out.
How do you repair handle on belmont barber chair?
Www.custombarberchairs.com repaired mine for me.
How do you determine age of belmont barber chair?
look under the seat
Where do you find parts for a belmont barber chair?
You can find parts for a Belmont barber chair through several sources. Authorized dealers or distributors of Belmont products often carry replacement parts. Additionally, online marketplaces like eBay or specialized websites that focus on barber equipment may offer parts. Lastly, reaching out to professional barber supply stores or forums can also provide leads on where to find specific components.
Where is serial number on Belmont barber chair?
Mine had a serial number tag just under the seat
How much is 1910 barber chair worth?
2000.00
How do you add oil to a belmont barber chair?
To add oil to a Belmont barber chair, first, locate the hydraulic pump mechanism, typically found beneath the seat. Use a suitable hydraulic oil, and remove the fill cap or plug on the pump. Pour the oil carefully until it reaches the recommended level, then replace the cap securely. Finally, test the chair's operation to ensure smooth functioning.
What is an emil j paidar barber chair 1961 worth?
hello
Were do you put the hydraulic fluid in and old belmont barber chair?
To add hydraulic fluid to an old Belmont barber chair, locate the hydraulic pump, typically found under the seat or at the base of the chair. There should be a fill port or screw cap on the pump; remove it carefully. Use a funnel to pour the appropriate hydraulic fluid into the port, ensuring not to overfill, and then securely replace the cap. Always consult the chair's manual for specific instructions and fluid recommendations.
What hydraulic fluid used in belmont barber chair?
Belmont barber chairs typically use a hydraulic fluid that is specifically designed for hydraulic systems, often a type of mineral oil or a biodegradable hydraulic fluid. It's important to refer to the manufacturer's specifications for the exact type of fluid recommended for optimal performance and to ensure compatibility with the chair's hydraulic mechanisms. Regular maintenance and fluid checks are essential to keep the chair functioning smoothly.
How much is a emil j paidar barber chair 1957 worth?
880.00
