0
To do this, you will use a torque-wrench. You don't usually torque a bolt to the present specifications, but you get the proper specification numbers out of a service manual. There is information on-line that will tell you the proper torque specifications of pretty much every bolt and nut in a vehicle. Google is your friend.
What else can I help you with?
Cylinder head bolts torque Suzuki maruti 800cc?
maruti 800 2002 tightening torques of cylinder head
What are the torque setting for ford puma head bolts?
Tightening torques are: Stage 1 - 15Nm Stage 2 - 30Nm Stage 3 - 90Degrees
What should you do if you don't have a torque wrench for tightening bolts?
If you don't have a torque wrench for tightening bolts, you can use a regular wrench and tighten the bolts to a "snug" level without over-tightening them. Be cautious not to apply too much force, as it can damage the bolts or the equipment.
Chevy 454 head bolt torques?
75 lb/ft Long Bolts 65 lb/ft Short Bolts
What is the recommended torque specification for tightening SRAM chainring bolts?
The recommended torque specification for tightening SRAM chainring bolts is 8-10 Nm.
What are use of wrench?
For undoing and tightening nuts and bolts.
What are the torques for the Nissan RB30 main caps rod caps and head bolts?
38ft/lb for the mains
What is the recommended torque specification for tightening 1x chainring bolts?
The recommended torque specification for tightening 1x chainring bolts is typically between 8-10 Newton meters.
What is the recommended torque specification for tightening bike stem bolts?
The recommended torque specification for tightening bike stem bolts is typically between 4 to 6 Newton meters.
Head bolt tightening sequence for Mazda e2000?
Begin by tightening the head bolts on each corner of the head. Next, tighten the center head bolts. Tighten the bolts on each end of the head and move towards the center.
What is the recommended torque specification for tightening MTB brake caliper bolts?
The recommended torque specification for tightening MTB brake caliper bolts is typically between 6-8 Nm.
What is the torque wrench settigs for a opel astra 00?
All bolts in any vehicle have specific torque ratings. -There are usually at least 35-50 specified torques for all the bolts. -You haven't said WHICH bolts you want the torque value for, so we can't answer. -Your best bet is to buy the specific manual for your car where all the torques will be written in one page.
