from what I could locate I believe your model 124 was manufctured in 1980
To determine the year of a Massey Ferguson 124 baler, you can check the serial number, which is typically located on a plate affixed to the frame. The serial number can provide specific information about the production year when cross-referenced with Massey Ferguson's production records. Additionally, consulting the owner's manual or contacting a Massey Ferguson dealer can provide assistance in identifying the year based on the model's features and specifications.
How do adjust the knotters on #12 Massey Fergurson hay baler
They were made by Vermeer.
Because its a closed mouth baler
5 foot X 6 foot
I have a model 12 MF baler, and I use the plastic twine all the time with no problems. Don in Oregon
To time a No. 3 Massey Ferguson square baler, first ensure the machine is properly set up and connected to the tractor. Locate the timing marks on the baler's flywheel and the knotter mechanism. Rotate the flywheel until the timing marks align, then adjust the knotter's drive mechanism to ensure it engages at the correct point in the cycle. Finally, check the operation by running the baler and observing the knotting action to confirm proper timing.
The leading three fingers on a Massey Ferguson 503 hay baler typically measure around 20 inches in length. These fingers are designed to effectively gather and feed hay into the baler for optimal baling performance. It's important to consult the specific operator's manual for exact specifications, as measurements can vary slightly based on the model and year.
To set the timing on a Massey Ferguson 124 baler, first, ensure the baler is disengaged and the tractor is off. Locate the timing marks on the main drive sprocket and the knotter drive. Adjust the knotter timing by loosening the set screws and rotating the knotter drive until the marks align correctly, typically at the point where the plunger reaches the end of its stroke. Finally, re-tighten the screws and verify the timing by testing the baler's operation.
To tighten the belts on a Massey Ferguson 450 round baler, first ensure the baler is turned off and safely parked. Locate the tension adjustment bolts, typically found on the idler pulleys or the main frame, and use a wrench to turn them clockwise to increase belt tension. Check the belt alignment and tension by observing the belts while manually rotating the baler, ensuring they sit evenly on the pulleys. Adjust as necessary until the belts are properly tensioned and aligned.
Where is the serial# located on a John Deere 336 square baler
A plunger on a Massey Ferguson model 3 hay baler may stick due to several factors, including a lack of lubrication, debris or hay buildup in the mechanism, or wear and tear on components like the plunger bearings. Corrosion or rust can also impede movement, especially if the baler has been stored improperly. Regular maintenance, including cleaning and lubrication, is essential to prevent these issues and ensure smooth operation.