5 foot X 6 foot
Using an educated guess I'd say Massey Ferguson.
5ft wide 3 to 6ft round
run the twine through the eyelets and through the needles , which are the large arms that rise up . take that twine and tie to the rear of the baler,both of them and run them where the bale forms. next trip the wheel that ties the bale, and turn the baler by hand for one cycle. the twine will be tied now cut the excess twine that u tied to the rear of the baler from the needles and you are ready to bale .
The power steering can not be adjusted on a Massey Ferguson 165 tractor. Check to make sure the hydraulic reservoir is full. This is usually the cause of most steering issues.
It appears that Massey Ferguson built the first ones in 1947. It was the Massey Ferguson TO-20 Toy Pedal tractor. From here, some of the tractor builders would make pedal tractors after the big motorized models. John Deere made their first in 1968.
Reduce ground speed while maintaining engine RPMs which amounts to a lower gear. Weave from side to side making an even bale.
No.
Well, honey, for that Massey Ferguson gc 2400, you're gonna want to use some good ol' diesel engine oil. Make sure it meets the manufacturer's specifications, or you'll be in for a rough ride. And don't forget to change it regularly, unless you want your tractor to kick the bucket sooner than later.
The International 2400 baler typically produces bales that are approximately 14 inches by 18 inches in size. These bales are generally around 36 to 40 inches long, depending on the specific settings and adjustments made during the baling process. The compact size makes them suitable for handling and storage, particularly for small-scale operations.
There is no best make of tractor. What works best in one country may not be so efficient elsewhere. That is why there are so many. But in the US Massey Ferguson, John Deere and Fendt are the most popular and considered the best.
What: make, model, what is it doing or not doing? GETERDONE!
It is used to make bales of hay.