0
What else can I help you with?
What is the difference between a access port and a trunk port?
• Access link: An access link is a link that is part of only one VLAN, and normally access links are for end devices. Any device attached to an access link is unaware of a VLAN membership. An access-link connection can understand only standard Ethernet frames. Switches remove any VLAN information from the frame before it is sent to an access-link device.• Trunk link: A Trunk link can carry multiple VLAN traffic and normally a trunk link is used to connect switches to other switches or to routers. To identify the VLAN that a frame belongs to, Cisco switches support different identification techniques (VLAN Frame tagging). Our focus for CCNA examination is on Inter-Switch Link (ISL) and 802.1Q.A trunk link is not assigned to a specific VLAN. Many VLAN traffic can be transported between switches using a single physical trunk link.
What knowledge do you need to configure layer 2-3 switches?
To configure Layer 2-3 switches, you need a solid understanding of networking fundamentals, including the OSI model, Ethernet concepts, and IP addressing. Familiarity with VLANs (Virtual Local Area Networks), trunking, and inter-VLAN routing is essential for Layer 2 configuration. Additionally, knowledge of routing protocols and basic command-line interface (CLI) commands for switch configuration is crucial for Layer 3 functionalities. Understanding security features, such as port security and access control lists (ACLs), is also beneficial for effective management.
What is a Smallnetbuilder?
SmallNetBuilder is a website focused on providing information, reviews, and resources related to home networking and small office networking products. It offers in-depth analysis of networking hardware, including routers, switches, and access points, as well as guides and benchmarks to help consumers make informed decisions. The site serves as a valuable resource for tech enthusiasts and professionals seeking to optimize their networking setups.
In the US how many households have internet access?
82% of US households have access to the internet
What is the purpose of safe mode with networking under advanced options menu?
To solve a problem with booting which requires access to the network to solve the problem Safe Mode boots the OS with minimum configuration and can be used to solve problems with a new hardware installation or problems caused by user settings
Which combination of DTP modes set on adjacent switches will cause the link to become an access link?
For a link to become an access link between two adjacent switches, both switches must be configured with the same DTP (Dynamic Trunking Protocol) mode. This can occur when both switches are set to "access" mode or when one switch is set to "dynamic auto" and the other to "dynamic desirable." In either case, the link will not form a trunk and will operate as an access link, allowing only untagged traffic.
How do you access the power window switches in the center console of 2005 jeep liberty?
You will have to pry off the top cover on gear shifter, then you will have access to center switches
Acl apply on switches or router?
ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.
A network technician is evaluating the desirable features of both access and distribution layer switches Which two features are common to switches at these two layers?
qos, link aggregation
What is the difference between a access port and a trunk port?
• Access link: An access link is a link that is part of only one VLAN, and normally access links are for end devices. Any device attached to an access link is unaware of a VLAN membership. An access-link connection can understand only standard Ethernet frames. Switches remove any VLAN information from the frame before it is sent to an access-link device.• Trunk link: A Trunk link can carry multiple VLAN traffic and normally a trunk link is used to connect switches to other switches or to routers. To identify the VLAN that a frame belongs to, Cisco switches support different identification techniques (VLAN Frame tagging). Our focus for CCNA examination is on Inter-Switch Link (ISL) and 802.1Q.A trunk link is not assigned to a specific VLAN. Many VLAN traffic can be transported between switches using a single physical trunk link.
Is there wheelchair access at Milton Keynes train station?
Milton Keynes Central station has lifts (elevators) from/to all platforms and access ramps adjacent to steps.
At which heirarchical layer are switches normally not required to process all ports at wire speed?
access layer
What is the minimum length ladder that a worker needs to access a landing nine feet above the adjacent floor?
12
What is the role of Ethernet switches in a network?
The role of ethernet switches in a network is to allow computers and other devices to talk to each other. This also allows many users to access a shared device such as a printer.
How do you log in to switch through Ethernet?
Most inexpensive switches do not have the capability to log into them because they don't need to be managed or configured. For managed switches that do, either the use of Telnet protocol or a console port will allow access to the switch.
Why is configuration information stored in the cmos ram rather than jumpers or switches?
Bc you can access the CMOS during the boot process and manually make changes if needed... whereas you have to open up the PC to adjust jumpers or switches...
Employees of a company connect their wireless laptop computers to the enterprise LAN via wireless access points that are cabled to the Ethernet ports of switches At which layer of the three-layer hie?
access level
