If its your home computer you should be able to just unplug the power to the router and wait 15 seconds or so then plug power back in. It will have no choice but to reset itself. If its a company computer make sure its ok to turn off power to the router before you unplug it.(ask the admin)(or you could screw up any up/down-loads going on).
Have trouble configuring your Netgear WNR2000 router? We're going to give you all the information you need to set up your Netgear router with the system here, so please read on. The Netgear WNR2000 Router enables high-speed internet access across a variety of devices. However, the process of setting up the router requires some support at first because it involves some technical elements that every person finds challenging to comprehend. In order to make it easy for these users to set up their Netgear WNR2000 Router and start using high-speed internet, we have included a simple guide. Continue reading the post to get more about Netgear Router.
router>enable router#configure terminal router(config)#line vty 0 4 router(config-line)#password cisco router(config-line)#login to configure router with telnet you must set up password or secret for privilieged mode.
You might choose option do not allow edit settings through wireless. If you have the password you have a choices to connect to the router directly using a lan cable and change your settings. If it didn't work just reset the router settings which is the worst scenario but you don't have much of choice. Each router has a reset button, read the manual to find out how to reset your router.
The default password for the D-Link 624 is admin as the username and the password is left blank.If you have changed the password you can reset the router by inserting a paperclip or pen tip into the reset button beside the power cord on the back of the router for 10-15 seconds. After resetting the router the username and password will be reset to the default state above.
go to the router settings on your internet browser (any browser) then type your IP it sould look sum like "192.168.0.1" -login to the router -click on installation -click wireless setup -click wizard wireless setup -(automatically assign network key) tick the manually assign a network key -type your pasword then save ^_^ [[ note that this worked for me on my dlink dir 600 wireless router ]] if u hav another router then i'm sorry for any inconvinience...
the password for netgear is password and if that doesn't work try 1234
There is no specific password to get on the internet. What you are trying to use is a locked Wi-Fi router that needs a WEP key, only available to the owner of that router. You must find an unlocked router to access the internet without a password.
Each router's Wi-Fi password is specific to the router, not to the iPod Touch. There is no universal code for routers, either.
http://kbserver.netgear.com/inquira/default.asp?ui_mode=answer&prior_transaction_id=320184&action_code=5&highlight_info=16777288,73,87&turl=http%3A%2F%2Fkbserver.netgear.com%2Fkb_web_files%2FN101496.asp&answer_id=220766469#__highlight Link to Netgear's website.
Simply Connect the router once again through Ethernet and remove the password ( as it will not ask the password to remove the existing...create it again..
Netgear routers are designed to be accessed through a specific log in password that is either automatically assigned or customized by the user at time of installation.
netgear
Have trouble configuring your Netgear WNR2000 router? We're going to give you all the information you need to set up your Netgear router with the system here, so please read on. The Netgear WNR2000 Router enables high-speed internet access across a variety of devices. However, the process of setting up the router requires some support at first because it involves some technical elements that every person finds challenging to comprehend. In order to make it easy for these users to set up their Netgear WNR2000 Router and start using high-speed internet, we have included a simple guide. Continue reading the post to get more about Netgear Router.
You should use the following: username: admin password: password If that doesn't work then reset the router and try again. It should work.
Just use an internet browser (Mozilla, Internet Explorer and so). In the address bar type the router ip address (you are supposed to know it). If you did everything right you will see the page with an user box and password box. Enter the user name and password and press enter. In this way you get access to the router settings.
I need the user name and password for Netgear router 192.168.1.1.pls help thanks
A Netgear DG834GT wireless router can be purchased from a variety of retail locations. Some stores that carry the Netgear DG834GT router include Upgrade Bay, Memory 4 Less, and The City Electronics.