answersLogoWhite

0

It consists of adding, removing or repositioning a metal clip to obtain the needed setting.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you change the settings?

Put the jumper clip on different pins


How can you get your old settings on your computer?

you can get your old settings by changing the position of your mother board jumper from pin 1,2 to 2,4. Turn ON the system for 2 mins. Turn OFF the system. Change d jumper to its previous position and Turn ON the system. Hahaha.


How does the jumper determine the speed of the mother board?

Different jumper settings on a motherboard connect different circuits and processes. Check the motherboard documentation to see which jumper setting is correct for your application. Use caution, because incorrect jumper settings may harm the motherboard.


How do you do the timing on a 1990 Ford telstar?

Many Fords of that vintage required that a jumper be placed on a socket near the distributor. Without the jumper in place it's not possible to change the timing of the engine. Install the jumper, set the timing with a timing light THEN remove the jumper and it should stay. You'll need to get a reference manual to identify the jumper location and to determine the proper timing advance settings.


What determines master or slave on ide ribbon cable?

The Jumper Settings


How do you change the jumper setting?

Put the jumper clip on different pins


What should you check when your new ide hdd is not recognized?

Try the jumper settings


What are the jumper settings for P4XVASD2 plus motherboard?

There is nothing found specifically for the jumper settings for the P4XVASD2 plus motherboard. It is suggested the manufacturer\'s manual be checked. The average motherboard jumper settings, for the Top 3, is Google PR 8,00, Yandex CY 35.020, External BackLinks is 666.051.634, Referring Domains 1.555.918, Google Indexed 31.294.633 and the edu Backlinks is 5.804.


What is the possible solution when the disk drive is not detected by the system?

Be certain that it is plugged in properly (both the data cable and the power supply) and that the jumpers are right. You have to know what the jumper settings mean and what the jumper settings are for the other device (if applicable) on the cable.


How can you change the master HD with the slave one in your dell PC?

Go the website of the company that manufactured your drives. Find the correct jumper settings and set the jumper for the one you want as master at the master pin and plug the main IDE cable into it. if you want to run the other as slave, find the correct jumper setting for slave, then plug the second IDE cable into it.


When a worksheet is acative the tab color displays as what?

You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.You can change colour settings, but normally it is white when it is selected.


What are the common jumper settings for hard drive configuration?

Primary master and secondary master