Its this thing behind the button that is activated to a computer and does what its so-pose to do
A light switch and a computer are similar because they both work on the on/off concept.
It can work at multiple OSI layers at the same time.
Well............the switch is attached to a metal clasp. So when the switch is switched, the two metal paths join and creates an electricity circuit!How Cool!
layer 3 layer 3 Switch/ Bridges / Hubs works at layer 2 as they utilizes MAC address to communicate. However i aggree above stated answer as there are some layer three switches that work at Layer3 i.e. Network Layer. Dhruv
A puff and suck switch is a device that a person wears where a tube goes into the mouth, and then they can puff and suck to select different things. It's like a kind of mouse for the computer except you operate it with your mouth.
It is inside the trunk. On the passenger side of the trunk the carpet is cut out in a circular shape. There is an inertia switch. Push down on the top botton to reset it.
Push-To-Make switch is a switch in which pressure is applied to the switch for it to let the electricl current flow through.
you press the button start
yes just push the format botton on the dsi settings
According to the manual, there is no switch. It's push to turn on/off. Mine doesn't work though, and doesn't push in.
hold the select botton while the key is off continue to hold the select botton and turn the key on
The big button and the button at the botton left
you control it by push the pink botton
Push reset botton on the back which is on the right hand coner
on the left side of the psp is a switch that looks like the power switch push it up and it should work
first time? i understand. there's a push botton on top of the ignition-key-hole, you'll need to press and hold it down in order to remove the key.
ALT You hold it then push f4 at the same time and you computer will close the internet