A light switch and a computer are similar because they both work on the on/off concept.
A switch has two states, on and off.
Toggle = back and forth, or on and off. A toggle switch toggles (turns) a light or other device on or off. Good example is a light switch (the wall kind)-- a toggle switch must also be of the "throw the stick back and forth" kind. Which a light switch basically is.
A light switch
if there I a green light on the bottom of your computer
light source
The engine computer through the brake light switch.The engine computer through the brake light switch.
behind the light switch under the dash
that doesn't even make any sense...
Yes, but it depends on what your problem is. The switch normally has different circuits for the lights, the cruise control, and a computer feed.
The steps to switch on a computer begin with making sure that the computer and its peripherals are plugged into an electrical outlet. Turn the power switch on the electrical outlet and press the power button on the computer tower. Turn on the computer monitor and wait for the computer system to start up.
You do not have to reset the computer after this repair. If the Check Engine Light is on it is not because you made this repair. If you disconnected the battery the computer will reset itself.
When having your brake light switch installed you have to have a mechanic to do it. It requires you to use a computer to reset some of your settings. I had someone to replace mine and my car wouldn't come out of gear due to the computer. So I ended up having to have it towed to a real shop so that they could reset the computer.
It is the brakes light switch
where is brake light switch
To control a light with a switch, the switch has to be connected in series with the light fixture.
If there's a red blinking light on the dash by the Hazard switch, yes.
Light switch was created in 1884.