answersLogoWhite

0

factors determining the propensity to move, of your 60kg mass, include its shape, its area, its roughness and so on. On the information given, no answer is possible.

But with appropriate choice of parameters, a quite low air pressure will suffice.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How much air do you need for air to come out of a straw?

You need to create a difference in air pressure between the inside and outside of the straw for air to come out. By sucking on the straw, you create low pressure inside, causing the atmosphere's higher pressure to push the air through the straw and into your mouth.


How much pressure pushes coolants into heater cores?

A high pressure will be able to push the coolants into the heater cores.


Do your eyes go inside if you push in your eyes with much pressure than normal?

no they do not


What are the two differences between force and pressure?

a force is a push or pull and pressure is a a push


How much gas does a push mower hold?

a push mower DOES NOT NEED GAS!! ( a good one though LOL)


What is throttle pressure?

In a auto its how hard you push your foot on the peddel or on a motocycle how much twist on your wrist haha


What does the plus 35 mean in wind load testing?

It is the POSITIVE pressure. Basically how much "push" the wind causes.


Why does your 97 Chevy blazer die down when you push on the gas pedal?

Need to check the fuel pressure with a gauge. May need a fuel filter too.


When a clutch is on its way out does it smell like it is burning?

yes it does smell like its burning but another way to know is if your clutch does not feel like there is as much pressure when you push down on the petal yes it does smell like its burning but another way to know is if your clutch does not feel like there is as much pressure when you push down on the petal


Why was it impossible to separate the Magdeburg Hemispheres?

It is impossible to separate the Magdeburg Hemispheres because the push of pressure on the outside is not balanced by the push of pressure from within.


How do you push back the brake fluid on ford focus to fit new rear pads?

You need to push back the pistons on the slave cylinder with a lever. A strong steady pressure with a tyre iron or spanner will do it


Three 200 check valves in a series how much pressure is required to push the oil through?

To determine the pressure required to push oil through three 200 psi check valves in series, you need to consider the cumulative pressure drop across each valve. Each check valve will require at least 200 psi to open, so you would need a minimum of 600 psi to ensure that all three valves open and allow oil to flow. Additionally, you should account for any additional pressure losses due to friction or other factors in the system.