0
What are Moving packets from source to destination across multiple networks called?
Wiki User
∙ 11y ago
Router
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What operates at the Network layer and manages multicasting?
The data link layer is responsible for the moving of the frames from one hop to another and the delivery of packets within the same network.But when there is the need to send the packets form one network to another then the network layer comes into play and with the help of logical addess being provided by the network later as well as with the help of routers or switches the packets are being reached to the desired destination. Anand bhat(mca@kiit-870024) or IGMP
Software that creates packets for moving data across networks?
Presentation Layer - ASCII or EBCDEC data syntax. Makes the type of data transparent to the layers around it. Used to translate date to computer specific format such as byte ordering. It may include compression. It prepares the data, either for the network or the application depending on the direction it is going.
What does mc and mi refer to in voltmeter and ammeter?
moving coil & moving iron
What layer arrange signals into logical units of information called frame?
Layer 2 or the 'Data' layer of the OSI model encapsulates either 'bits' from the physical layer (1)- moving up the TCP stack or 'Packets' from the Network layer (3)- going down the the stack. 7 - Application Layer DATA 6 - Presentation Layer DATA 5 - Session Layer DATA 4 - Transport Layer SEGMENT 3 - Network Layer PACKET 2 - Data Layer (Incorporating LLC and MAC) FRAME 1 - Physical Layer BIT A good nmemonic for remembering the data encapsulation in the OSI model is 'Don't Some Peolple Fry Bacon' - Data, Segments, Packets, Bits.
What is the name of a horizontal escalator?
A moving walkway, moving sidewalk, peoplemover, travelator, walkalator, autowalk, or movator.
Determined to achieve a destination?
Moving in a predetermined direction
What operates at the Network layer and manages multicasting?
The data link layer is responsible for the moving of the frames from one hop to another and the delivery of packets within the same network.But when there is the need to send the packets form one network to another then the network layer comes into play and with the help of logical addess being provided by the network later as well as with the help of routers or switches the packets are being reached to the desired destination. Anand bhat(mca@kiit-870024) or IGMP
What is destination device?
Many computer commands move data from one file to another or from one storage device to another. This is referred to as moving the data from the source to the destination (or target). The term is also used as an adjective, as in destination file or destination device.So basically where every your moving your file or etc... too is the destination device.
Is robert pattinson and krisen stewart moving to the isle of wright?
No they're moving to her favourite holiday destination, Hull
Does forward tell when how much or where?
Yes, forward can only be defined with a destination. With your known location and the destination you will know how much to travel and in what direction. Sometimes the destination is defined as "no destination", however, this is still technically a destination that requires an infinite amount of distance. If the destination is where you are then forward will be a time spacial distance as you are constantly moving in time toward something.
If we are moving decimal point to the right we are moving from a?
Number to a multiple by a positive power of 10.
Software that creates packets for moving data across networks?
Presentation Layer - ASCII or EBCDEC data syntax. Makes the type of data transparent to the layers around it. Used to translate date to computer specific format such as byte ordering. It may include compression. It prepares the data, either for the network or the application depending on the direction it is going.
What is difference between routing and switching?
Switching involves moving packets between devices on the same network. *Conversely, routing involves moving packets between different networks.Switching is able to determine where a packet should be sent by examining the MAC address within the data link header of the packet (the MAC address is the hardware address of a network adapter).A switch maintains a database of MAC addresses and what port they are connected to.(operate at layer 2 of the OSI model).Routers, on the other hand, operate at layer 3 of the OSI Model.A router is able to determine where to send a packet using the Network ID within the Network layer header. It then uses the routing table to determine the route to the destination host.
When copying or moving cells if data already exists in the destination cells Excel will do what?
It will give you a warning and ask if you want to replace the contents of the destination cells. You can then choose whether to do so or not.
Is an emission spectrum created when a gas is heated at high pressure?
no it is created by electrons moving down in orbitals producing energy packets of photons
Sample of trivia for physics?
The only rock that floats in water is pumiceAll moving objects are merely wave packets of extremely high frequency.
If you moving the decimal point to the right we are moving from And the value to be?
A value to its multiple by a positive integer power of 10.
