0
What else can I help you with?
What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number?
It issues an advertisement request for new VLAN information.
N which mode is a VTP switch operating if it has been configured to only forward VTP advertisements?
transparent
Why does a switch need a default gateway address configured?
There isn't one. The switch only knows about MAC addresses, and the default gateway isn't one of those addresses.
Why would an administrator use a network security auditing tool to flood the switch MAC address table with fictitious MAC addresses?
to determine which ports are not correctly configured to prevent MAC address flooding
What needs to be configured in order to have effective port monitoring and see all traffic on the network?
This feature is named "port mirror" or SPAN. You need to get a manageable switch to have this feature. You also need to setup a passive monitoring program(ie: WFilter) to monitor the traffic.
What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number?
It issues an advertisement request for new VLAN information.
Which two protocols can be configured on a Brocade Layer 2 switch?
Stp and vsrp
Which element does not need to be configured to support SSH connections to a router or switch?
A hostname
What will happen if vtp client has a higher revision number than vtp server?
It does. But only when the client is just introduced in the network. A summary/subset advertised is only send by the server-mode switch if there is a change in its vlan database which will affect the configuration revision no., or if the timer expires (5 mins). However, if a client-mode switch comes in the network or boots up, it will send a summary advertisement to all the other switches. Once it receives a summary advertisement from the server, it knows that it has a higher revision no. and immediately a subsert information which contains its vlan database. This the server with lower configuration no. will accept and flush its vlan database and accept the database of the client. This is because the summary or subset information does not say whether it is sent by the client or the server.
What is true of the configuration of switch S1?
Switch ports Fa0/1 and Fa0/3 are configured to carry data from multiple VLANs.
How is 1 way switch wiring typically configured in a residential electrical system?
In a residential electrical system, 1-way switch wiring is typically configured with a single switch controlling a single light or electrical fixture. The switch has two terminals for the live wire and is connected to the fixture with a single cable. When the switch is flipped, it either completes or breaks the circuit, turning the light on or off.
N which mode is a VTP switch operating if it has been configured to only forward VTP advertisements?
transparent
When inter VLAN routing is used how are the switch ports that link to the router configured?
switch(config)#int type <no> switch(config-if)#switchport mode trunk switch(config-if)#switchport trunk allowed vlan all/vlan no switch(config-if)#exit switch(config)#exit switch#
Which three statements are correct concerning the default configuration of a new switch?
It is configured in VTP server mode. STP is automatically enabled. All switch ports are assigned to VLAN1.
How does a switch that is configured for 802.1Q trunking handle untagged frames that are received on a trunk port?
The frames are assigned to the native VLAN.
How does a switch interface that uses sticky port security handle MAC addresses?
They are configured dynamically and are saved in the running configuration.
What causes electrons flow when a switch is turned on?
An electric field causes electrons to flow when a switch is turned on.
