If you disconnect the power cord to the hard drive, when you turn the computer back on, the hard drive will not be operational. Additionally, if you leave the IDE (or SATA) cable connected when the power cable is disconnected, the system will take longer to POST because it will try to identify the device connected, but it will not be able to. If it is the only hard drive you have in your system, the computer won't boot up because your operating system is on the hard drive.
Umm, there will be no error message when the power is cut off. The system just shuts down. Now if you meant power to the disk drives and not the system, then the system will just hang. The OS is on the disk drive and with no power, there is no messages of any kind.
RAM Power Supply Hard Drive
Yes. The case holds the motherboard, CPU, RAM, power supply, and storage devices (hard drive, optical drive).
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
Two components in a PC that might make a whining sound are power supply and disk drive. Noise from a power supply usually means it is time to replace the power supply, however, it might just mean that the fan is dirty and the dust needs to be blown out with some compressed air. If your hard drive is making any unusual noises it is time to make an immediate backup of your data and replace the drive.
UPS = Uninterruptible Power Supply
ntldr is missinng press any key to restart happend to me after hard drive fail
Pulling the plug isn't too bad... it's re-inserting it that could cause problems. It could cause a power surge.
It connects the drive to the system power supply.
the optical drive will connect to the power supply with a connector called molex connecter it is a 4 prong connector
Disconnect them from any power supply!
Yes
Yes as long as the hard drive has its own power supply and not powered by the USB port.
A "Berg" connector.
In order to remove the power supply board in a Hitachi 60UX58B, first unplug the TV. Then, unscrew the rear panel. Disconnect all parts that are connected to the power supply board. Remove the screws that are holding the power supply board to the chassis. Lift the power board off the chassis.
The drive appears to be a bad one. Why do you need a floppy disc drive anyways?
Case / power supply, Motherboard, CPU, Memory, Optical drive, Hard drive...
Motherboard, Power supply unit, Hard drive, Cd/drive.