0
What else can I help you with?
Why the name RS232?
Because R2D2 was already taken!
How can you link RS232 serial data on COM1 to output on COM2?
Yes on a modern computer you will need a USB to 9 pin RS232 converter or previously use the LPT parallel port.
Where did the 232 in RS-232 come from?
The 232 doesn't stand or come from anywhere. It's just a reference number. RS-232 = Recommended Standard 232
What is the Rs232 Cable?
Also known as a serial cable; typically with 9 or 25 pin D-sub connectors.
Will a Conexant RS232 V92 Modem answer a distinctive ring?
yes it will. More can be found in the data sheet at Conexant's web site
In max232 what does max stands for?
maximum 232
Why do you connect capacitor in MAX232?
The input to the max232 ic will be of Transistor Transistor Logic (TTL) and its voltage range will be of 5 volt. The output of the max 232 ic will be of Recomended Standard 232 Logic (RS232 logic) and its voltage range will be of 12 volt. The max 232 ic which is operating on 5 volt supply has to step up the 5 volt input to 12 volt. Hence a capacitor is used for pumping the voltage and called as pumping capacitor.
Full form of RS in RS232?
RS232 means "Recommended standard no. 232", EIA standard for serial communication Thirumalesha.....
What is max232?
Max 232 is a commuincations device used mainly for serial commands to and from a flash rom.
What does the RS-232 standard apply to?
RS232 is a communications protocol for electronic devices to exchange information
If there are RS232-to-USB adapters why are there no USB-to-RS232 serial adapters?
RS-232 serial ports are far slower than USB ports. With very few exceptions, devices that use USB ports would be impractical to use on a serial port.
What do you use in laptop - rs232 or rs485?
rs232
What is the Main applications of RS 232 ports?
Serial port, this one, (http://en.wikipedia.org/wiki/Image:RS-232.jpeg) it is usually coloured green on modern computers.
Why ttl voltage level converting to rs232 level?
Whwn an IC is connected to a PC, then the voltage levels of these two should be synchronized. For this purpose, the TTL voltage level is converted to RS 232 level. RS 232 is the interface between a PC and an IC.
What is the function of Max232?
The MAX232 is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-F inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5 V, and can accept ±30-V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels. The driver, receiver, and voltage-generator functions are available as cells in the Texas Instruments LinASIC library.
Max232 interface with at89s52?
yes
What are the Differences between RS232 and RS449?
rs232 isfaster than rs449
