You need to buy a wireless router and connect it to the modem.
It's a network only without cables. The Access point(sometimes built into the router) is the hub of the network. Most wireless devices DO NOT transmit to each other but to the hub that routes the traffic to the other devices. This is usually done on a certain frequency (fixed) determined by the routers configuration.
Data during a flight is collected by using the WLAN network. Because it is wireless and much more convinent . It has a small wireless switch HUB which all flights can connect to at the same time.
An active hub can act as a repeater hub. It may also work as an Ethernet hub, network hub, and a multiport repeater.
An expansion hub is a powered hub that is 2.0 and USB. It simply allows you to connect to devices that you were not able to connect to with a regular hub.
Press Settings, then General -> Network -> Wifi. Select the wireless hub by name, and enter the wireless password (if there is any).
Unfortunately, a hub isn't a router so you won't be able to get wireless Internet from one.
30 feet
wireless
if your wireless router has lan ports then the answer is yes.
In most cases you can.
Without a hub / router, you can not access the internet. So the benefits in having a hub will be accessing the internet through 2 ways - wireless and wired.
YES, the first thing to understand is that there is a vast difference in the two. HUB and ROUTERS (Hub is a Traffic Cop, that is able to focus on the job at hand and perform exactly as needed with traffic. A router is merely a traffic light that performs exactly as commanded.) Now any wireless hub or router will connect any wireless device, but to share a high speed intenet (Cable or DSL)you MUST have a HUB. Hubs are designed to receive a broadband carrier and wireless traffic. But if you having difficulty connecting most likely your wireless devices are not finding or detecting the wireless router or hub. Winxp is unusual, but the best fail safe here is install software for all devices and SHUTDOWN everything! Broadband modems, wireless hub/router and all connected computers. Disconnect power to Broadband modems and wireless hub/router. Wait 10-15 seconds then Plug in power to Braodband modem first. Then wait about 5 seconds and plug in wireless hub/router. Once bioth devices are light up normally turn on all connected computers. The computers should detect the system and self route to compleation.
You need to buy a wireless router and connect it to the modem.
If you will search Yahoo or Google with the term, "4 port wireless hub" you will find one.
If you have an ADSL modem, you connect the ADSL modem to the hub, and you connect cables from the hub to each computer. If you have only a single computer, you need no hub.If instead you want to use a WiFi (wireless) connection, you also need an access point for the wireless connection.
Yes. TiVo does not require a wireless network. It can be connected through a cable to a wired network.