A CPU socket is a mechanical connection. Its main function is to serve as a connection that holds the CPU and allows it to communicate with the motherboard.
The Socket 478 connector is used for Intel Pentium 4 processors and their Celeron equivalents.
Pin 1 on the CPU is aligned with Pin 1 on the ZIF socket.
It has a white Triangle The previous answer is quite useless. The triangle marks where pin 1 is on the CPU. When installing a CPU into the socket, the installer lines up the triangles so the CPU fits correctly into the socket.
Normally...The internet and the plug in the wall, silly. well, if by CPU you mean "central processing unit" as in the core chip in a computer, it is plugged into a socket. This socket has many pins that connect to everything else in the computer including the memory, I/O interfaces, and more.
computer hardware
write the function of cpu
it is used for connecting CPU with a phone line or a lan cable so that ur PC comes into network..
A CPU socket is a mechanical connection that holds the CPU and allows it to communicate with the motherboard. Zero Insertion Force (ZIF) sockets will have a leaver at the side that allows the user to remove the CPU chip easier. They also contain a load plate that will hold the CPU in place, allowing maximum contact with the heat sink. Depending on the CPU being installed, the socket will have either small holes (for PGA CPUs) or metal contacts (for LGA CPUs).
The microprocessor is installed into the CPU socket on the motherboard. A CPU socket can only fit a certain range of microprocessors.
The CPU does the work and determines the order in which operation are preformed . There are 3 main section of the CPU: - the on-chip memory section - the arithmetic -logic section - the control section
what is the function of the heat sink fan? *well the CPU generates heat and in order for the CPU to remain in a safe temperature zone a haet sink is added on top of the CPU.
That refers to the place where the CPU is plugged in.
It is more expensive than a single CPU socket motherboard
Socket 478
Socket A.
FM2
the VLIF socket is used to make use of the set screw to lock the CPU into place.