0
What else can I help you with?
What is the minimum cable requirements for 100 Mbps Ethernet?
100Base-T network require usually cat5 maximum of cable length 100 meters to 380meters.
What are Potential problem with daisy-chaining hubs on a 10BASE-T network?
exceeding the maximum network length network + guide to networks Chapter 5 Review Question 6
10base2 and 10base5 wires refers to?
10BASE2, or IEEE 802.3, is an early Ethernet Standard that makes use of industry-standard RG-58 coaxial communications cables connected to BNC T-connectors. 10BASE2 gets its identifier, assigned by the Institute of Electrical and Electronics engineers (IEEE), from the following characteristics: "10" means it has a maximum transmission speed of 10Mbps; "BASE" is shorthand for "Baseband Transmission" or "Baseband Ethernet," meaning that the medium only transmits Ethernet signals; and "2" refers to its maximum network segment length of 185 meters, rounded up to 200 meters.
What is the maximum length of day at poles?
six months
What is the maximum length of a NetBIOS name?
15 Characters
What is the maximum length of the cable on the 100BaseT Ethernet network?
100 meters or 328 feet unless a repeater (such as a switch or a router) is placed inline.
What is the maximum length of a 1000 ft Ethernet cable that can be used for network connections?
The maximum length of a 1000 ft Ethernet cable for network connections is 328 feet.
What is the the maximum length of a cable on a 100baseT indicator?
maximum is 100 meters or 328 ft
What is the maximum length of a Cat3 Ethernet cable that can be used for networking purposes?
The maximum length of a Cat3 Ethernet cable that can be used for networking purposes is 100 meters.
What is the maximum length of a Cat 3 Ethernet cable that can be used for networking purposes?
The maximum length of a Cat 3 Ethernet cable that can be used for networking purposes is 100 meters.
How would a repeater be used in an Ethernet segment?
Repeaters are usually used in coaxial based ethernet networks. For this purpose they are used to extend the length of a network segment. For example, in a 10base2 ethernet network the maximum length of a segment is 180 meters. A repeater could join two segments together to increase the length of the network and the number of clients in the network. In today's modern networks you will see neither coaxial networks nor repeaters in a LAN. Repeaters are used for DSL transmissions, but not for LANS.
What is the maximum cable length for a 100 baseT Ethernet?
100BASE-T has a data trasnfer rate up to 100 Mbps. 100BASE-T is based on the older Ethernet standard. Its 10 times faster than Ethernet it is also called Fast Ethernet. The 100BASE-T standard is IEEE 802.3u
What is the maximum length of a 100Base TX Ethernet cable?
100 mbps
What is the minimum cable requirements for 100 Mbps Ethernet?
100Base-T network require usually cat5 maximum of cable length 100 meters to 380meters.
What Ethernet specification has the longest maximum segment length?
1000 base‑lx
What is the maximum length of a single 300 foot Ethernet cable that can be used for networking purposes?
The maximum length of a single 300-foot Ethernet cable that can be used for networking purposes is 100 meters, or approximately 328 feet.
What is the maximum distance of Ethernet 10 Base2?
The maximum distance for Ethernet 10Base2, also known as thin coaxial Ethernet, is 185 meters (or approximately 607 feet) per segment. This standard allows for a total network length of up to 2000 meters when using multiple segments connected by repeaters. It operates at a speed of 10 Mbps and uses a BNC connector for connections.
