0
What else can I help you with?
What is the maximum distance of Ethernet 10 Base2?
The maximum distance for Ethernet 10Base2, also known as thin coaxial Ethernet, is 185 meters (or approximately 607 feet) per segment. This standard allows for a total network length of up to 2000 meters when using multiple segments connected by repeaters. It operates at a speed of 10 Mbps and uses a BNC connector for connections.
What IEEE designates Thick net as what kind of Ethernet?
IEEE designates Thicknet as 10BASE5 Ethernet. It is an early form of Ethernet that uses a thick coaxial cable to transmit data at a speed of 10 Mbps over a distance of up to 500 meters. Thicknet requires the use of repeaters to extend the network beyond its maximum length and employs a bus topology for network connections.
What is the maximum length of an ethernet cable on a 100BaseT network?
longest i have seen in a store was 100ft but if you need longer get a roll of Ethernet cable and 3 ends for it then make your own length of cable.
What is the maximum length of a Cat3 Ethernet cable that can be used for networking purposes?
The maximum length of a Cat3 Ethernet cable that can be used for networking purposes is 100 meters.
What is the maximum length of the cable on the 100BaseT Ethernet network?
100 meters or 328 feet unless a repeater (such as a switch or a router) is placed inline.
What is the maximum length of a Cat 3 Ethernet cable that can be used for networking purposes?
The maximum length of a Cat 3 Ethernet cable that can be used for networking purposes is 100 meters.
How would a repeater be used in an Ethernet segment?
Repeaters are usually used in coaxial based ethernet networks. For this purpose they are used to extend the length of a network segment. For example, in a 10base2 ethernet network the maximum length of a segment is 180 meters. A repeater could join two segments together to increase the length of the network and the number of clients in the network. In today's modern networks you will see neither coaxial networks nor repeaters in a LAN. Repeaters are used for DSL transmissions, but not for LANS.
What is the maximum length of a 100Base TX Ethernet cable?
100 mbps
What is the minimum cable requirements for 100 Mbps Ethernet?
100Base-T network require usually cat5 maximum of cable length 100 meters to 380meters.
What Ethernet specification has the longest maximum segment length?
1000 base‑lx
What is the maximum length of a single 300 foot Ethernet cable that can be used for networking purposes?
The maximum length of a single 300-foot Ethernet cable that can be used for networking purposes is 100 meters, or approximately 328 feet.
What is the difference in a 10Base2 network and a 10Base-t network?
10Base2 and 10Base-T are both Ethernet networking standards, but they differ primarily in their cabling and connectivity. 10Base2 uses coaxial cable (often referred to as "thin Ethernet") and supports a maximum length of 185 meters, allowing for a bus topology. In contrast, 10Base-T utilizes twisted-pair cabling (typically Cat 3 or higher) and supports a maximum segment length of 100 meters, enabling a star topology. Additionally, 10Base-T networks typically allow for easier connections and expansions due to the use of hubs or switches.
