it is an on/off feature so it will turn off a cirtian feature or turn it on
Toggle = back and forth, or on and off. A toggle switch toggles (turns) a light or other device on or off. Good example is a light switch (the wall kind)-- a toggle switch must also be of the "throw the stick back and forth" kind. Which a light switch basically is.
The system network configuration refers to assigning a particular IP address by a network configuration window. The configuration window is usually invoked by selecting the network configuration sub menu from the setup command.
The I/O configuration AHC would be the best HDD and SDD configuration for me.
Architecture or Configuration
pls, i want you to give me a full meaning of logical configuration
In a 4-way switch configuration, the toggle switch physically changes the connection of the electrical circuit by alternating the flow of electricity between the different traveler wires. This allows you to control a single light fixture from multiple locations by changing the pathway of the electrical current.
A toggle switch, typically a mechanical or electronic component, can act as a toggle by altering between two states, such as on and off.
its the same yes. ============ Incorrect. Many pickup-selector switches are toggle switches, such as on a Gibson Les Paul. But many, many guitars have toggle switches that do not act as pickup selectors. For example, a Gretsch 6118 Anniversary has a toggle switch to activate a bassy tone circuit. A Brian May Guitar signature has toggle switches for phase options on the three Burns Tri-Sonic pickups, and separate toggles for on/off on the pickups. Some guitars have a toggle switch that activates a mid-boost or volume boost. "Toggle switch" is just a broad term for a family of switches that can serve a variety of functions. Not necessarily for pickup selection.
The noun toggle is the singular form; the plural form is toggles.
A toggle is a metal or wooden pin or rod, or similar, which helps you to secure things.
Because 'T' stands for 'Toggle'
The way to sew on a toggle button is to first pin the toggle button in place on the jacket. Next, take a threaded needle and knot it tightly. Insert the threaded needle through the loop in the toggle at least four or five times, securing the know underneath the fabric. Tie and knot and the toggle should be in place.
Toggle bolts can typically hold a maximum weight capacity of 50 to 100 pounds, depending on the size and type of the toggle bolt.
To install toggle bolts properly, first drill a hole in the wall, insert the toggle bolt through the hole, then tighten the bolt until it is secure. Make sure the toggle wings open up behind the wall to provide strong support.
To use toggle bolts in drywall for hanging heavy objects securely, first drill a hole in the drywall. Insert the toggle bolt through the hole and tighten it until it is secure. Then, attach the object to the toggle bolt using the provided hardware. Make sure the toggle bolt is rated for the weight of the object you are hanging.
when dealing with bit, there are only 2 bits which are '0' and '1'. when the current bit is '0', if we toggle this bit, it will become '1' and when the current bit is '1', if we toggle this bit, it will become '0' that is
you can just use a toggle switch,,,you need a relay capable of the amps it takes for the starter.it would connect between the starter and the battery,then you would need a toggle switch preferably a momatary toggle switch to activate the relay.