0
What else can I help you with?
How do you build an electric motor with over 2000 RPM?
an electric motor can be build with over 2000 rpm,by increasing the supply frequency.
What are the disadvantages to have a large valve overlap?
High end Rpm output tails sooner, engines idle is lumpy, emissions are higher, too much overlap can cause rough low rpm driving, more chance of detonation.
Concrete mixer whose motor got following configuration 5.5 KW 380v 1140 RPM 3 phase what is the suitable size of generator to run this motor?
You should get a 3 phase generator that has 8-12 KW. If you had to you could use a 3 phase 5.5-6 kw but it may wear out faster because you are using 100% power. The 3 phase gen will allow you to select 480 volt which can be converted to 380 for the mixer. The rpm of the motor in irrelevant because the generator is the power source in this situation, once the gen powers the motor it will produce 1140 to power the mixer.
Where do you find frontier sweepstakes software?
you will find it the same place you'll find yourself if you use it, prison.
You saved a temporary internet file and you cant find it how do you find it?
maybe try looking again? Use the Search Tool to find it.
Where can you find the rpm on your furnace heater?
Furnaces have no RPM ratings
How i find the RPM of compressor?
To find the RPM (revolutions per minute) of a compressor, you can use a tachometer, which measures rotational speed directly. Alternatively, if you know the compressor's frequency (in Hz), you can calculate the RPM using the formula: RPM = Frequency (Hz) × 60 / Number of Poles. For electric motors, the number of poles is typically specified on the motor nameplate.
What does the "RPM" mean, and is higher or lower better?
RPM = Rotations Per Minutes. the higher the rotation speed, the faster your computer can read/find your files.
How do you calculate driven rpm of sheave?
To calculate the driven RPM (revolutions per minute) of a sheave, you can use the formula: [ \text{Driven RPM} = \frac{\text{Driver RPM} \times \text{Driver Diameter}}{\text{Driven Diameter}} ] This equation accounts for the diameters of both the driver and driven sheaves. Simply plug in the RPM of the driver sheave and the diameters to find the driven RPM.
Why doesnt the rpm go above 4000 rpm in a 2002 Z24 cavalier?
that car has a rev limiter to make ur tach go higher find and eliminate it
Where can you find the option for performance curves of 6bt 5.9 engine which delivers 108 kw at 2500 rpm and max torque of 500 NM at 1300-1700 rpm?
You will find the information on the Cummins website for the 5.9l B engine
What is the rpm of a 100 tooth gear that is meshed with a 50 tooth drive gear turning at 200 rpm' s?
To find the RPM of the 100-tooth gear, you can use the gear ratio. The gear ratio is determined by dividing the number of teeth on the driven gear (100 teeth) by the number of teeth on the drive gear (50 teeth), which gives a ratio of 2:1. Since the drive gear is turning at 200 RPM, the driven gear's RPM will be 200 RPM ÷ 2 = 100 RPM. Therefore, the 100-tooth gear will spin at 100 RPM.
What happen if the RPM of power generator is going down and what is cause of this?
There are several reasons that the rpm of a power generator is going down. The rpm going down could cause damage to the motor if it is not fixed. To find the exact reason why this is happening review your user manual.
How do you find fuel consumption per hour if you know air fuel ratio volume of engine and RPM?
To start you'll need to know the CF/M of the engine at that RPM. From there, you're on your own.
How do you reset how the car idles and where can i find it and at what rpm is it supposed to idle?
My 1990 idles at about 850 and with the ac on 1100
What is Static RPM?
what are static RPM ?
What is the market cap for rpm International Inc rpm?
As of July 2014, the market cap for RPM International Inc. (RPM) is $5,914,850,976.25.
