0
network layer
Wiki User
∙ 12y ago
Wiki User
∙ 11y agoNetwork Layer
Add your answer:
Earn +20 pts
What is the broadcast address of network 192.168.113.216.255.255.255.248?
10.56.176.0 is your network. 255.255.240.0 is your subnet mask. Valid broadcast addresses would be 10.56.176.255 (network broadcast) and 255.255.255.255 (general network broadcast). The general network broadcast would actually broadcast to every machine on the internet, but internet routers will block all traffic from it to prevent this. In effect if you use either 10.56.176.255 or 255.255.255.255, the result is broadcasting to all machines on your network.
What is different limited broadcast and directed broadcast?
Limited Broadcast - Sent to all NICs on the some network segment as the source NIC. It is represented with the 255.255.255.255 TCP/IP address. This broadcast is not forwarded by routers so will only appear on one network segment.Direct broadcast - Sent to all hosts on a network. Routers may be configured to forward directed broadcasts on large networks. For network 192.168.0.0, the broadcast is 192.168.255.255.
What is an effective way to minimize the frequency and effects of broadcast storms on an Ethernet LAN?
Using a layer two network device (a switch) which will minimize broadcast storms because the device will maintain a table of hardware addresses and forward packets only to the relevant port.
What is the broadcast address for the network 172.16.70.32?
The network address for 192.168.1.157 255.255.255.0
Explain the principal responsibility of the network layer and data link layer in a Wide Area Network in detail?
the network layer is the same as the data link layer, they do the same thing. that is that they communicat with the network to send packets of data...
An example of a layer that is absent in the broadcast networks is?
network layer
Which impact does adding a layer 2 switch have on a network?
elimination of broadcast traffic
Whic network layer device can separate anetwork into different broadcast domains?
ROUTER!
In a three-layer hierarchical network design which distribution layer function delineates broadcast domains?
routing between VLANs
Discuss the need or lack of need for a network layer OSI layer 3 in a broadcast network?
The network layer is responsible for addressing nodes in a logical way. It is also responsible for making decisions on routing a packet from one network to another. In a broadcast network, routing is not needed. A transmission from any attached station is received by all other attached stations. Other functions,such as sequencing, flow control, error control, can be done at layer 2. The MAC sublayer is responsible for addressing across the LAN. With the Data link layer and its sublayers (MAC & LLC), no network layer is needed.
What is a result of improperly implementing a network with redundancy at Layer 2?
end device malfunction because of broadcast storms
What is meant by computer broadcast network?
A broadcast network use to advertise the subnetmask of a particuler network
When was Agri Broadcast Network created?
Agri Broadcast Network was created in 1972.
Which network layer protocol is responsible for routing packets on the network?
The network layer is the layer that is responsible for routing packets on the network. This is the layer in which Internet protocol operates. In the seven layer OSI model, the network layer is the third layer from the bottom.
What are excessive amounts of broadcast on a network called?
This is referred to as a broadcast storm.
What layer programs access the network?
Network Layer
Why a cuticle is absent in piliferous layer?
because cuticle is waxy layer
