0
To set a password on virtually any wireless router you can do the following: First, go to "Start" and "Run." Type in "cmd" without the quotes. When the Command Prompt comes up type in the following, without quotes: "ipconfig" Locate the box that says "IP Address" and remember that number. Go to your default internet browser and type in that number. (Note: If it does not work, when typing the "IP Address" in the internet browser, type the following, without quotes: "192.168.1.1" or "10.1.1.1") If a box comes up asking for the login and password, it is probably either blank or of the following: Username: admin Password: admin or Password: admin Now go to "Advanced Setup." Click on "WEP" and select "Enable" and choose either 64 bit or 128 bit encryption. Click the box called "Passphrase" and type in what you want the password to be. Click "Save Settings." Click on "WEP" again and remember what Key 1 is. (Note: This is important.) Now you can set all users to this. More information can be found here: http://www.iinet.net.au/support/wireless/guide/wireless_security.html
What else can I help you with?
I'm having problems installing my NETGEAR wireless-N 300 router I've come to a point where I have to put in user name and password what do I have to type there I've tried everthing?
If you didn't change settings yet, you can find default username (I think it's admin) and password in the router manual.
How to setup a Netgear WNR854T if you have no Ethernet connection only wireless card?
Find your router in network list and connect to your router. You might need to put proper settings in your router for DHCP server and wlan connection.
If you have a wireless router that needs a password for you to use it how do you unlock it so you never need to use a password again?
If you are trying to connect to it via wireless Windows allows you to store the password on the computer for the wireless network so you only have to put the password in once per computer. If you are setting up multiple computers you can save the password in a notepad document and place that on a USB key. If you want to take a password off of the wireless network you can connect to the wireless router (please see user documentation for the router) and disable wireless encryption. This however is strongly discouraged because anyone can access an unencrypted wireless network.
How is a netgear router configured?
One will find that the process of configuration for netgear routers very simple and easy. Like most routers, the original packaging which contains the netgear router will have an installation CD or DVD Rom which allows customers to easily configure their netgear router by following the simple to comprehend steps explained on the disk. The setup will guide customers through each process, and after the process is complete, the netgear router has been successfully configured and ready for use immediately.
You have wireless laptop netgear you want to make desktop wireless you have CD wireless lan cardbuspc1 adapter Do you just download this onto desktop and put in netgear info?
You'll have to be more specific. What is "cardbuspc1"?
What is the password for linksys?
What ever password the owner of the linksys router put on it.
How do you take a password off of your router?
go to the router settings on your internet browser (any browser) then type your IP it sould look sum like "192.168.0.1" -login to the router -click on installation -click wireless setup -click wizard wireless setup -(automatically assign network key) tick the manually assign a network key -type your pasword then save ^_^ [[ note that this worked for me on my dlink dir 600 wireless router ]] if u hav another router then i'm sorry for any inconvinience...
What does my wireless for your laptop wont work on your password protected router you put the password in but it wont work its works on other routers that use passwords?
You need to make sure that your wireless adapter supports the security. Check if the network requires WPA2, if does and you cannot connect to it, it means your adapter can't work with and the router has to configured to work with first generation of WPA.
How do you find the router password key to hook a new computer into an existing router?
Check security setting for wireless network in your router settings. Some routers allow to see the key, some mask it with asterisks. If your router masks the key (in router settings), you have to put a new key, if you want to connect more computers.
Need to connect to apple ipod touch from wifi?
Simply go into settings on your iPod touch and go to "Wi-Fi" which is located at the very top of the settings page. Find you router on the list of wireless connections and simply tap it to connect. If you have put a password on your router you will be required to enter your password.
How do you put security on a dlink wireless router?
Check the wireless network properties, one of settings is security for wireless networks. If you want a definite answer you need to show your router's model.
How can you find out who is connecting to your wireless internet?
It depends on the kind of router you have. If you have a westell, it would tell you when you put in 192.168.1.254 as your URL. Linksys routers dont tell you but, you could put security on the router so only your household can acess it. I say Wep is best as a security. For any other kind of router, type in 192.168.1.1 in the Url. admin is the default password. Hope this helps.
