AFter you reach the partition zone during formating you press ESC to return partition
Go to control panel - administrative tools - disk management. There will be all the tools in a handy console to format and partition your hard drive.
as root: df -h to see the disks and partitions mkfs.ext3 /dev/sdb1 Where sdb1 is the disk and partition you want to format. This will format sdb1 partition to ext3.
I depends on your operating system. In DOS you would use fdisk to create the partition on your removable disk and the format command to actually perform the format.
The computer starts to make necessary preparations to format and name the partition.
Disk management
Use Disk Utility to format or partition hard drives. You should back up the drive before formatting or partitioning.
No diskdefragmenter cannot be used to format a partion. It is used to make all the files to get fragmented. Formatting of partition can be done by using disk management option in the computer management
You can format drives and partitions that are not in use by the system, but you can not extend the size of a partition.
FORMAT is a Microsoft command-line utility that is used for disk formatting. The function of the command prompt is to format a partition of the file system.
The second operating system should be on a different partition or disk. If you format the partition/disk that the unwanted operating system is on, the machine will have no choice but to boot to the remaining operating system.
partition hard disk
Try <A href="www.goodlucksoft.com">PBD(Partition Bad Disk) to isolate bad sectors and fix the bad sector problem.</A>