0
What else can I help you with?
Are most computers consisting of many computers and are usually connected by a networking devices such as a hub switch or access point?
Most computers today consist of many processors. Most business computers are connected via hub/switch/access point. Most broadband home users are connected to an access point, only fraction of current home computers use a hub/switch.
Which type of address is used in Ethernet to direct data to a specific computer through a hub?
Really depends if the hub is connected to a modem and an active ISP then it would be a public IP address from the ISP. If your hub is connected to a router, then it would be a private IP address provided by the router. There are different types of hub, I can post the link for you the varieties. If only computers are connected to the hub, then no ip address.
Does the HomeConnect Home Network Ethernet Hub provide Internet On-site support?
On-site support is provided via Internet for the HomeConnect Home Network Ethernet Hub.
What type of Hub do I need for 12 computers?
Powerdsine 12 Port Power Over Ethernet Hub is reasonable priced and is capable of connecting to 12 different computers, the next alternative is the HP 12 Port FiberChannel Hub which can also connect 12 machines, just not over ethernet.
How many computers can be connected to a 24 port hub?
24
In a computer lab some computers with Ethernet nics are connected to an Ethernet hub by cat-5 cables and some computers have an 802.11 network card there is an 802.11 access point which is also co?
I think I can answer your question -- once you ask it. 802.11 is a wireless ethernet protocol, there are currently 3 subtypes; a, b and g. In order to have any computers or laptops connected to the same network, the wireless access point would need to be plugged into the ethernet hub. Unless the wireless network is subnetted, i.e. the wireless access point provides the IP addresses for its client computers, the WAN port on the wireless access point may not be used. The AP may be connected in client mode, i.e. connected via a LAN port and not the WAN port, bypassing the internal router, if one exists on your model AP. This allows the wirelessly connected computers to get their IP addresses from the network DHCP server. Perhaps this may already have answered your question(s)!
When do workstations share a collision domain?
two computers connected to the same hub AND two computers connected to the same access server
How can you use the same modem for two computers using different OS?
You need an Ethernet hub. Connect your modem and both computers to the hub, and both of your computers will have a connection available. The OS's only affect the connection settings on each computer.
How do you connet to other system using port?
You can connect computers through various type of ports (e.g. through Ethernet (wired or wireless) , USB or Serial port. What port you pick, will depend on your application needs and at what speed you want the connection to work. If two computers have 10/100Base-T Ethernet port these can be directly connected using a crossed Ethernet cable without need of a switch or hub. - Neeraj Sharma
How do you network home computers?
1. Go buy a piece of equipment called a "hub" or "switch" and some "ethernet cables" 2. Hook the computers to the hub with the cables. 3. Next you'll have to figure out how to assign your IP addresses. Note, if you buy a "small home/office router" you just set all of the computers to use a network configuration called "DHCP." It's under your "network bindings"
What is the best system for linking several home computers?
One can purchase an ethernet hub which would allow two computers to share a link with the same modem. This will simeotaneously link both computer from a up using a tcp/ip protocol.
Do you have to connect your router to your PC via ethernet cable or can you connect via wifi and do you have to connect your router to your hub?
You do not have to connect your router to your PC via ethernet cable, you can instead connect via wi-fi and your router must be connected to your hub.
