Saves input shaft spline
The key features of the DT Swiss Spline hub include high-quality construction, smooth rolling performance, and easy maintenance. The benefits of this hub are improved efficiency, durability, and overall performance for cyclists.
180 torque lbs too much and you F up the hub Bearing BE CAREFUL !! PS when sliding the 1/2 shaft spline in the bearing It is best to FREEZE the SPLINE in the refrigerator this shrinks the spline and slides in MUCH BETTER DO NOT BEAT IT IN !! you can damage the bearing like that !!
To install an 11-speed micro spline cassette on a bicycle, you need a compatible hub that supports the micro spline design. Additionally, you will need an 11-speed chain and shifter to ensure proper gear shifting. Make sure your derailleur is also compatible with an 11-speed cassette.
you have to take all brakes and rotor off the hub. then you must spin the hub so the access hole is in front of the bolts,and take all 3 bolts off. then you must pull the hub off of the spline.
the purpose of the spline is to support the weight of your head
It will either be a 28 or 31 spline. I believe that most open rear ends used 28 spline and the limited slip rear ends used 31 spline.
spline (= groove) = ranura (noun), ranurar (verb)
In the mathematical subfield of numerical analysis, a spline curve is a curved defined polynomials portions. A spline can also be a portion of wood or metal.
Spline goes into transmission or transfer case.
no.
maa ka lauda
Smooth curves