0
What else can I help you with?
What is the difference between bit signal and dirty bit?
bit signal - original intended bit value that was sentdirty bit - corrupted incorrect bit value modified by noise eventsThe dirty bit may or may not match the bit signal originally sent, it may have been modified more than once by different noise events.
Signal cable for 0 to 10 volts signal?
bit means a signal that goes around every where.
What is a bit interval?
A bit interval is an amount of time required to send one signal bit.
Every pulse in a digital signal?
Bit
What is the bit rate of the RS232 signal from the computer?
i think its 96000BPS
What is the bit rate of a signal in which 10 bit lasts 20 microseconds?
What is the bit rate of a signal in which 10 bit lasts 20 microseconds?
What is the bit rate of the following signals aA signal in which bit lasts for 0.001 seconds bA signal in which bit lasts for 2ms cA signal in which 10 bits lasts for 20s dA signal in which 1000 bits?
a 1 bits/second b 500 bits per second c 500 bits per second. I assume you meant 20 msec for c.
What bit rate is possible when an OC-1 is carrying a DS-3 signal?
An OC-1 (Optical Carrier level 1) has a bit rate of 51.84 Mbps. A DS-3 (Digital Signal level 3) signal has a bit rate of 44.736 Mbps. Since an OC-1 can carry a DS-3 signal, it can accommodate this bit rate, allowing for efficient transmission of the DS-3 data within the OC-1 framework.
What is the bit rate for the signal in which 8 bit lasts 16 ns?
Bit rate = 8 / (16 * 10-9) bits/second
What is the bit rate of the Pam signal?
32 kHz
What is the purpose of the jam signal in CSMA?
The jam signal is a signal that carries a 32-bit binary pattern sent by a data station to inform the other stations that they must not transmit.
A digital signal has a bit rate of 4000bps What is the duration of each bit bit interval?
Answeryes it is AnswerRb = 4000 bpsTb = 1/Rb = 250 μsKotsos
