0
What else can I help you with?
What is a floppy drive data cable?
a cable for connecting a floppy drive to the computer motherboard.
How many wires in a floppy cable?
AnswerA standard floppy drive cable in a computer has 34 pins.
What is fdd data cable?
FDD cable is for floppy disk drive (FDD).
How can you tell the difference between the hard drive data cable from the floppy drive data cable?
1. A floppy cable will almost always contain a small "twist" in it, in which a port of the wires are turned in reverse.2. A floppy cable has 34 pins. A PATA hard drive cable has 40 pins.
Explain how the two available drives on FDD data cable are distinguished?
Floppy data cable is 34 pin flat cable having two connectors for floppy drive. The floppy drive connected at the end connector is A: and the another connector disk is B:..
How many pins are there on a floppy drive cable?
There are two cables connected to the floppy drive; Power cable - 4 pins, Data cable - 34 pins.
What does a floppy drive cable do?
A floppy drive cable connects a floppy disk drive to a computer's motherboard, allowing data transfer between the two. It typically consists of a flat ribbon design with multiple connectors that can accommodate one or two drives. The cable transmits data signals and power to the floppy drive, enabling it to read from and write to floppy disks. While floppy drives are largely obsolete, these cables were essential for their operation in earlier computing systems.
What two cables connect to the hard disk?
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
What is common name for the data cables used on floppy?
The common name for the data cables used on floppy drives is "floppy ribbon cable." These cables typically have a flat, multi-conductor design and connect the floppy drive to the computer's motherboard. They usually feature a 34-pin connector for the floppy drive interface.
Floppy drive cable is a 34-pin ribbon cable and a twist in the cable?
used on a floppy
When the floppy disk driver's light stay on?
The most usual occurrence of this when the data cable is plugged in upside down onto the floppy disk. Just unplug is and flip it over. Nothing has been hurt. Just power down, flip the data cable and power up again. Otherwise, something is wrong with the floppy and it should be replaced.
A technician is troubleshooting a computer that has a malfunctioning floppy drive The technician observes that the floppy drive light remains lit constantly How should the technician attempt to rep?
the data cable connected to the floppy drive is connected in reverse.
