0
What else can I help you with?
Which type of address is use in an ethernet frame header?
mac address only
Identify five protocols in web browsing?
HTTP (the main protocol for the World Wide Web); TCP; IP; and if you use an Ethernet network, you are using Ethernet and ARP; DNS. There are probably a few more, too.HTTP (the main protocol for the World Wide Web); TCP; IP; and if you use an Ethernet network, you are using Ethernet and ARP; DNS. There are probably a few more, too.HTTP (the main protocol for the World Wide Web); TCP; IP; and if you use an Ethernet network, you are using Ethernet and ARP; DNS. There are probably a few more, too.HTTP (the main protocol for the World Wide Web); TCP; IP; and if you use an Ethernet network, you are using Ethernet and ARP; DNS. There are probably a few more, too.
What all ethernet networks independent of their speed or frame type and use an access called?
csma
Why router needs mac address?
the tcp/ip frame uses the ip address to send messages between devices (computers, printers, etc) on your network. This frame is inside an ethernet frame on the network layer. The ethernet layer does not use ip addresses at all, they use mac addresses. For an ethernet frame to travel through a router, it needs a mac address. Your router actually does not need an ip address. It will respond to broadcasts. In fact sometimes it won't answer to tcp/ip requests. Its job is to deliver the datagram to its destination more than it is to answer you (your computer that is). So sometimes a router will not answer a ping, but a computer on the other side of the router will answer even if there are several router in the path.
Which of the following tools could you use to determine whether a user's workstation is transmitting packets in the proper Ethernet frame type for your network?
a. Multimeter
An ip packet to be transmitted by ethernet is 60 bytesif LCC is not in use is padding needed in ethernet and if so how many bytes?
Yes, padding is needed for an Ethernet frame if the IP packet is only 60 bytes and the Length/Type field (LCC) is not in use. Ethernet frames must be at least 64 bytes in total, including the header and trailer. Since the Ethernet header is 14 bytes and the trailer (Frame Check Sequence) is 4 bytes, the total without padding is 78 bytes. Therefore, 0 bytes of padding are needed because the total frame size exceeds the minimum requirement.
What type of device would you use to connect a dissimilar Ethernet local area network to a mainframe?
If the mainframe were using TCP/IP then you don't need to do anything except route the traffic to it. If the protocols are not Ethernet on both the mainframe and the LAN then you would need a gateway to convert the protocols back and forth from the mainframe.
What type of topology does Ethernet use?
BUS
What type of connection does http use?
HTTP works over a TCP connection.HTTP works over a TCP connection.HTTP works over a TCP connection.HTTP works over a TCP connection.
Does wifi reveal your ip address?
Just as much as Ethernet or Arcnet does: you simply cannot use TCP/IP (and UDP/IP), without revealing your IP address.
What kind of LAN would you use for Linux?
You could use any kind supported by the Linux kernel, though a TCP/IP network over Ethernet or wireless would probably be best.
What type of cabling do modern ethernet networks use?
10base5
