Computers are an integral part of our lives. Unfortunately, the local computer repair industry has developed into a bit of a racket. For this reason, many people are taking it upon themselves to perform their own computer repairs. That is a great decision, and most users discover that it is relatively simple, and not at all as horrifying as they first imagined. Here are some of the core points newbies should keep in mind.
Opening the case voids the warranty on prebuilt computers, such as those from Dell or Gateway. Check the computer to verify that it is still not under warranty. If it is, then the user should consider sending it back to the company from which they purchased it for repair. Get the company on the phone, and talk to them. There is an outside chance they can help you fix it right there and then. If they cannot, they will set up the RMA (Return Merchandise Authorization).
With the case open, do not just dive in and start fiddling. For maximum protection, wear an antistatic wrist strap. Another option is working on a hardwood or stone surface. Try to make certain that both the worker and the computer are grounded. Keep the computer grounded by plugging it into the wall but keeping the power off. If not wearing a strap, the worker can ground himself or herself on the case by touching bare metal.
For the person inside of a computer case for the first time, it might seem confusing. This will all become second nature in short order, but for the time being, make a note every time you remove a piece. This way the user will know exactly where it goes when it comes time to reinstall it. Before tugging on anything thoroughly examine the area for clips and snags. Users should also know that it requires some force to insert memory and PCI cards.
Take your time. When faced with a question or confusion, stop and take a break. Access the internet via another computer if possible, and do some research. Today’s computers are very resilient, so as long as you are being careful, there are no real concerns about doing serious damage.
By taking it to a professional for repair. This is not a DIY repair.By taking it to a professional for repair. This is not a DIY repair.
There is a problem with the SRS. Take it to a professional for repair. This is not a DIY repair.There is a problem with the SRS. Take it to a professional for repair. This is not a DIY repair.
The airbag computer has detected a malfunction. This is not a DIY repair. Take it to a professional.
Have the SRS repaired by a professional. Not a DIY repair.Have the SRS repaired by a professional. Not a DIY repair.
By taking the car to an A/C repair shop. Not a DIY job.
There is a problem with the SRS. Take it to a professional for repair. Working on the SRS, is not a DIY repair. Serious injury can occur.There is a problem with the SRS. Take it to a professional for repair. Working on the SRS, is not a DIY repair. Serious injury can occur.
This is a major repair that should only be attempted by a professional. This is not a DIY repair for a novice.
100
DDIY means dont do it yourself, ask Anojan
By having a professional repair the problem that has turned the light on. They will reset the light after the repair. This is not a DIY repair.
One can find tutorials on how to repair drywall from a variety of locations. You can try a DIY manual from a library or bookstore. Alternatively you can ask in forums or look up DIY blogs.
Not a DIY repair. Serious injury can occur when working on the SRS. This is a job for a professional.