If it isn't starting you have another problem.
Sounds like the ignition switch.
It is best advised to get the Dodge Caravan Key Fob battery replaced by the dealership. The reasoning for this is that messing with this battery can be dangerous. One also can touch certain receptors that are never supposed to touch.
i have a dodge durango 200 but one of my key got lost and if i use my spere key it only turn the alarm on but i cant turn alar of.is there a way to do it?
when my 1998 Dodge Durango would start and cut back off, I had to reset the alarm by using the lock / unlock buttons on my key remote.
The sentry key immobilizer system can not be bypassed on a Dodge. It needs repaired is malfunctioning.
you have too lock the vehicle with the power lock switch, then unlock the passenger side door with the key, works on my 2000 durango
Yes, the little keyhole looking thing next to the door handle is actually a keyhole. insert key and turn, presto! the door is unlocked.
Try sitting in the seat and using the key.
Manual-Handle under Dodge emblemPower-Push trunk button on key fobPush trunk button on overhead console
The sentry key immobilizer system can not be bypassed on a Dodge. It needs repaired is malfunctioning.
Thanks to no help from Chrysler or Dodge....I ended up figuring this one out for myself. I hope this will help you out. Start your Durango and leave it running for about two minutes. Once you do this, press both the lock and unlock button on your keyless entry (key fob) and do this three times, each time holding it pressed down for about two seconds each time. After this, your keyless entry should be reset and working. This had to be done on my Durango after I changed my battery.
Thanks to no help from Chrysler or Dodge....I ended up figuring this one out for myself. I hope this will help you out. Start your Durango and leave it running for about two minutes. Once you do this, press both the lock and unlock button on your keyless entry (key fob) and do this three times, each time holding it pressed down for about two seconds each time. After this, your keyless entry should be reset and working. This had to be done on my Durango after I changed my battery.