answersLogoWhite

0


Best Answer

A microwave leak detector actually detects microwave electromagnetic energy. There are a number of different types, and it might be best to touch on them before finishing up.

One way to divide microwave leak detectors is by the "quality" of the insturment. There are a number of "cheapie" units that will give an indication of leakage, and then there are the really expensive survey meters that cost hundreds of dollars and should be calibrated at least annually. Both respond to microwave energy, and you can see where this is going.

If you suspect a leak in an oven, it is best to call and ask about a "professional" checkup. It's cheaper to take a machine in than to have someone come by, but for builtin units, you don't have much choice. Make a call and ask a few questions to see what can be done and for how much.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does a microwave leak detector detect?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is a halide leak detector test?

detect nytrogen


How do you detect freon leak?

Have a shop perform a leak test with a halogen detector.


A microwave leak detector can be used to check what?

Leakage of microwave radiation past the door seal in a microwave oven.


What is detector mount in waveguide and its function?

used to detect the microwave signal


What types of gases does a gas leak detector detect?

The types of gases a gas leak detector detects is the not the regular kind. It detects some poisonous gases and gases harmful to your lungs or you in general.


What does an ultrasonic leak detector do?

Ultrasonic leak detectors, are also referred to as acoustic gas leak detection systems. They are designed to detect gas leakage at outside facilities.


What is a microwave leak detector used for?

In general, a microwave leak detector is an electronic device used on microwave ovens to check for leaks around the door seal. The device "looks for" microwave energy that might be getting past the seals. There are a number of different types ranging from "cheapie" meters to "survey units" that cost hundreds of dollars and should be calibrated yearly.


How do you test for refrigerant leak in 1990 Plymouth acclaim?

With an electronic leak detector or fluorescent dye.With an electronic leak detector or fluorescent dye.


What is A microwave leak detector?

A portable handheld radio receiver operating in the microwave band, that when it detects microwave RF above a certain strength it gives some form of warning signal. This warning may be audible, visual, or be shown on the face of a meter.


What metal can a metal detector detect?

A metal detector can detect all types of metal....depending on in what type of soil it is in.


What is the best way to diagnose and repair an AC leak in a 1997 Infinity I30t?

There are 2 , common, ways to detect leaks. An electronic leak detector and dye. Sometimes both are needed. Of course the system has to be full of freon to for the dye to leak out or for an electronic detector to find a leak (just like finding an air leak in a tire). If the leak is at a connection, you may be able to just replace O rings, if a component (Like the compressor, condensor, evaporator) is leaking it will need replaced. If the system has freon in it, the law says to recover it with a recovery machine. There are 2 , common, ways to detect leaks. An electronic leak detector and dye. Sometimes both are needed. Of course the system has to be full of freon to for the dye to leak out or for an electronic detector to find a leak (just like finding an air leak in a tire). If the leak is at a connection, you may be able to just replace O rings, if a component (Like the compressor, condensor, evaporator) is leaking it will need replaced. If the system has freon in it, the law says to recover it with a recovery machine. There are 2 , common, ways to detect leaks. An electronic leak detector and dye. Sometimes both are needed. Of course the system has to be full of freon to for the dye to leak out or for an electronic detector to find a leak (just like finding an air leak in a tire). If the leak is at a connection, you may be able to just replace O rings, if a component (Like the compressor, condensor, evaporator) is leaking it will need replaced. If the system has freon in it, the law says to recover it with a recovery machine.


What is the function of diode detector?

the function of a diode detector is to detect stuff