answersLogoWhite

0

Check the fuse box. Most large appliances have their own fuses. So the room electric will work but the fuse may be tripped.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Why does my dryer work properly when empty BUT it turn off with clothes?

that happens with all dryers. they turn on then turn off during the washes


Whirlpool dryer start switch will not work?

whirlpool cabrio powers up but wont turn on, just makes click noise


What would cause a bathroom hand dryer to go off by itself?

When you put your hand under the dryer it works for a certain time, then turns off. If you still put your hand under the dryer it will turn on again. If it goes off and doesn't work then there must be something wrong with it.


You were changing the light bulb in your Kenmore dryer with the power on and hit the hot terminal on the dryer causing a spark the house breaker does not seem to be tripped. model?

It is not safe to work on electrical appliances with the power on. If you hit a hot terminal and saw a spark, there may be damage to the wiring or electrical components of the dryer. It is important to turn off the power to the dryer and have it inspected by a qualified technician to ensure it is safe to use.


How do you get the wirlpool duet dryer control locked light to go off?

To turn off the control lock on a Whirlpool Duet dryer, press and hold the "Control Lock" button for about three seconds until the light goes off. If your model does not have a dedicated button, try pressing and holding the "Start" button or the "End of Cycle" signal button, depending on your specific model. Make sure to consult the user manual for your dryer for exact instructions. If the light remains on, consider unplugging the dryer for a few minutes to reset the control board.


Why do clothes pockets turn inside out in a clothes dryer?

Clothes pockets turn inside out in a clothes dryer due to the tumbling motion during the drying cycle. The pockets get caught on other clothes or the dryer drum, causing them to become inverted. To prevent this, emptying pockets before putting clothes in the dryer can help.


Can you use a blow dryer to straighten hair that is already dry?

Its really easy to straighten your hair with a hair-dryer. To straighten your hair using a hair-dryer you need to comb/brush your hair then get a hair-dryer and put the heat level on high for about 20 seconds whilst combing/brushing. Then turn the hair-dryer off and just your hair will be straight. It may be frizzy but for this you can use hairspray to flatten.


Why does my left turn signal not work with my head light on?

A bad ground.


How do I set tumble dry low in the drying machine?

The settings on a dryer differ by manufacturer. A coin operated dryer has a slide or dial to turn the dryer to a lower temperature. A digital dryer has buttons to push to change the temperature settings. Many dryers just have a dial to turn to select the temperature or timer settings.


What cause your turn signal in the back not work when you turn on the head lights?

Check the tail light ground wires.


Can a 120 hair dryer work with a 110 outlet?

Yes - a hair-dryer rated at 120 volts will work in a 110 volt outlet.


What is the recommended method for installing a 5 prong dryer cord?

To install a 5 prong dryer cord, follow these steps: 1. Turn off the power to the dryer. 2. Remove the old cord by disconnecting it from the terminal block. 3. Connect the new cord to the terminal block, matching the colors of the wires. 4. Tighten the screws to secure the connections. 5. Double-check your work to ensure everything is properly connected. 6. Turn the power back on and test the dryer to make sure it is working correctly.