You can identify a glass-lined water heater by looking for specific labels or markings on the unit, often indicating "glass-lined" or "glass-coated." Additionally, if you can access the tank, check for a smooth, glossy surface inside, which is characteristic of glass lining. Another indicator can be the manufacturer's specifications or documentation, which usually detail the materials used in the tank's construction. If in doubt, consult the manufacturer's website or customer service for confirmation.
You can tell if your hot water heater is bad if you notice signs like no hot water, strange noises, leaks, or rusty water. If you experience any of these issues, it's best to have a professional inspect and potentially replace your hot water heater.
You can evaporate it.
There are several signs that can indicate a bad water heater. Look for leaks, strange noises, rusty water, or a lack of hot water. If you notice any of these issues, it may be time to have your water heater inspected or replaced.
To confirm if a hot water heater is grounded, you can use a multimeter to test the continuity between the water heater's metal parts and a known ground, such as a grounding rod or the main electrical panel. If there is continuity, then the water heater is grounded. If you are unsure, it's best to consult a licensed electrician.
There are a few signs that your water heater may be going bad. Look out for leaks, strange noises, rusty water, or a decrease in hot water supply. If you notice any of these signs, it may be time to have your water heater inspected or replaced.
get a professional or it will explode due to unexperienced
Genrally speaking $200-$500 depending on condition
Doesn't matter which way the water flows. The heater core is just a tube with fins and water can flow either direction.
If you put a thermometer in each glass the one that reads the highest temperature has the most thermal energy
no glass is hard and not asorbant
egg was dropped in a glass of water
There is no way of telling from here. It will be a double breaker, most boxes will have 3 doubles. One for the stove, one for the AC and one for the water heater. Process of elimination should tell you which is for the heater.