To release the bonnet catch on a Mercedes C180 with a broken grill tongue, you can access the catch mechanism from underneath the vehicle. Use a flathead screwdriver or a similar tool to carefully push the catch lever towards the driver's side, which should release the bonnet. If this doesn't work, you may need to remove the front grille or access the catch from the engine bay. Always ensure safety first and consider consulting a professional if you're unsure.
Release the main bonnet catch on the steering wheel column. Push the bonnet catch in the front grill once and it'll come out half way, then pull the half out catch to open the bonnet.
If the bonnet catch is broken, you can try to open the bonnet by using a flathead screwdriver to pry the catch mechanism. Insert the screwdriver into the gap near the latch and gently push or twist to release the catch. Alternatively, if accessible, you can pull the cable from inside the car if it’s still attached. If these methods fail, you may need to consult a professional mechanic for assistance.
The bonnet catch is in the foot well on the passenger side near the door but high up. Pull it to release the catch then put your fingers between the gap of the slightly open bonnet lid in the middle. You will find a small plate that needs to pushed up ton release the lid.
If you want to get the bonnet open when the catch has broken and the is no cable to get hold of the Renault Grand Espace; use the screwdriver to PUSH the catch from right to left.
make a hook out of a coat hanger. release bonnet from inside the car push hook through the slot the catch normally sits through lift bonnet and pull hook forward to release the safety catch hey presto your in lol
On a 2010 Freelander 2, the bonnet release catch is located inside the vehicle, on the driver's side. It is situated just below the dashboard, to the left of the steering wheel, and is typically marked with a bonnet icon. Pulling this catch will release the bonnet latch, allowing you to open the hood.
a long reach screw driver through the grill to release the catch,
The release is on under the steering wheel, near the driver's door. Once released, the bonnet catch is to the right of the center, just above the grille. Slide it to the right to pop the bonnet.
In the glove box
Bonnet release on escorts is usually on the underside if the steering column, below the steering wheel. The bonnet will pop and then you have to do the bonnet release catch around the badge on the front grill.
If the bonnet catch on your Mercedes Vito is broken, you can try to access it by pulling the release cable directly, if it's accessible. Alternatively, you may need to remove the front grille or use a flat tool to manipulate the catch mechanism from underneath. If these methods don't work, it's best to consult a professional mechanic for assistance to avoid damage to the vehicle.
The bonnet release catch on a Citroen C3 is typically located on the driver's side, near the footwell. It is usually a small lever or pull handle marked with a bonnet icon. Pulling this catch releases the bonnet latch, allowing you to lift the bonnet. Always refer to the owner's manual for specific details related to your vehicle's model year.