8.30 minutes
8.30 minutes
It typically takes around 2-3 minutes to boil 150ml of water on a Bunsen burner, depending on the intensity of the flame and the efficiency of the burner.
A yellow flame would take longer to boil water using a Bunsen burner compared to a blue flame. This is because the yellow flame is cooler and provides less heat energy for boiling water.
Well, honey, it doesn't take a rocket scientist to figure this one out. Boiling 50 ml of water using a Bunsen burner should take around 1-2 minutes, depending on the intensity of the flame and the efficiency of your burner. Just keep an eye on it, and don't let it evaporate into thin air!
This no long has an answer the closest someone said is - " Robert Wilhelm Eberhead Von Bunsen re-invented the Bunsen Burner in 1855." Thank you and sorry.
The Bunsen burner was invented by German chemist Robert Bunsen and his assistant Peter Desaga in 1854. The invention of the Bunsen burner revolutionized laboratory work by providing a controlled source of heat for chemical experiments.
It's a lot more complicated than you seem to think.The flame of a Bunsen burner is very hot, so "not very long" is a reasonable answer. It's very hard to quantify numerically without actually doing it, though, especially since I'm not sure whether you mean "start to boil" or "boil dry". The volume doesn't really matter much for the start of boiling.
It took about three years to make the Bunsen burner. This was an invention that was credited to the works of Robert Bunsen.
Boiling 150ml of water on a Bunsen burner typically takes about 3 to 5 minutes, depending on factors like the burner’s flame intensity, the initial temperature of the water, and environmental conditions. A higher flame will heat the water faster, while a lower flame will take more time. Additionally, using a smaller container can enhance efficiency by minimizing heat loss.
No more than a few minutes.
As long as the solution is a water-based solution, it should be fine. You should never ever use a Bunsen burner to heat a flammable liquid such as alcohol, ether, acetone, etc.
No, a Bunsen burner does not produce enough heat to melt silver, which has a high melting point of 961.8 degrees Celsius. You would need a hotter heat source such as a torch specifically designed for melting metal.