Why is anything called by whatever its named? Because someone once blurted the sound out while referencing the object and said that would make a good name for this thing. Perhaps because it has tines that pierce at least two different directions like a fork in the road.
A prong on a fork is called a Tine
A projecting point or prong of a fork is called a tine.
In a fork, the fulcrum is the pivot point where the handle meets the prongs. The load is located at the tips of the prongs where the food is picked up, and the effort is applied at the handle when lifting the food.
You will first need to fill the fork completely with fork oil. Fork should be collapsed with the fork spring removed. Bleed the air out of the inner cartridge by slowly cycling the damper rod through it's full stroke. From this point you can set the oil level to the correct height measured from the top of the outer fork tube. Factory specs are: Minimum Height: 155mm Standard Height: 139mm Maximum Height: 117mm
The purpose of a fork dropout in a bicycle frame design is to provide a secure and adjustable connection point for the front wheel fork to attach to the frame. This allows for easy installation and removal of the wheel, as well as proper alignment and stability while riding.
A berry fork or a carving fork. Also a disposable two pronged fork can be known as a cheese fork or a chip fork shfork
5 pounds of pressure
A fork
Fork and knife
A fork is s fork. A spork is a spoon ending in short fork tines.
pork fork
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.