0
What else can I help you with?
Why would you use a pillar drill instead of a hand drill?
A pillar drill is used for larger holes, more exact placing of holes, or drilling repeated holes with a jig to insure uniformity.
If you drill holes in the muffler will it make it sound betterand if so where do you drill the holes?
start with your head A muffler with holes in it would sound like a muffler with holes in it, terrible. Drilling holes in the muffler would increase the chance of getting exhaust fumes in the vehicle which is a bad thing.
When would you use a twist drill?
In wood work, a twist drill would be used for making small holes where an ordinary wood drill (auger) would probably split the wood.
What class of jig would normally be used to tap holes?
Drill Jigs are used to tap holes.
What part of the cooker would be used to cook boiled water?
The part of the cooker used to boil water is typically the heating element or burner. In an electric kettle, it would be the metal coil or plate that heats up when powered on. In a stovetop cooker, it would be the gas or electric burner beneath the pot or kettle containing the water. The heat generated from these sources raises the water's temperature until it reaches its boiling point.
Why would a person need a portable drill?
A portable drill does many tasks. It drills holes can be used as an electric screw driver and do other things. A portable drill can be carried from place to place to do a job.
Can you drill out a five lug rim to make it an 8 lug rim?
No,if you had the talent to accurately drill the 8 holes so the wheel still ran true and the holes didn't boarder on the original 5 lug,you would be smart enough not to try.
Can you re drill bigger holes in rims?
A machine shop could possible do it, but you could not do it yourself. There is no way you could get all of the holes centered and the wheel would be out of balance. It is more involved than just using a bigger drill bit and drilling it out.
What kind of tool did pioneers use to drill holes?
They used an auger to bore holes in wood. A more sophisticated version that would be used later was called a brace and bit.
How do you determine the drill size of tapped holes?
To determine the drill size for tapped holes, you typically refer to a tap drill size chart, which provides the recommended drill bit diameter based on the size and thread pitch of the tap. The general formula used is to take the nominal screw size and subtract the thread pitch to find the appropriate drill size. For example, for a 1/4"-20 tap, you would use a 7/32" drill bit. Always ensure to consider the material being tapped, as it may affect the final drill size choice.
Can you drill a hole in exhaust pipes?
You can drill a hole in anything as long as you have a strong enough drill bit and drill. But why would you want to drill holes in your exhaust? The exhaust piping is there to route exhaust gases away from underneath the car so they don't pool up underneath your car and seep into the cabin and cause a variety of health problems.
Why does the town drill holes in the street and sidewalk?
There could be many reasons why a town maintenance crew would drill holes in the street and sidewalk. In most cases, they may have been drilling holes for a probe to check the depth level of the frost line. The winter of 2013-2014 had very high depths for frost line in many cities in the upper Midwest.
