answersLogoWhite

0

It allows air to circulate through the heater while switched on.

What else can I help you with?

Related Questions

Why is there a metal grille at the top of a convector heater?

The metal grille at the top of a convector heater helps to protect the internal heating elements and prevents any objects from falling inside, reducing the risk of fire hazards. It also allows heat to be distributed more evenly by letting air flow through the grille.


On a convector heater where does the air flow into it?

If there is no fan to pull the air in, fresh air must come into a convector heater from below. It is drawn in because the air heated by the heating element is warmer and therefore lighter than the colder air below it. So the warmer air rises to leave the convector heater from the top.


If you fix paper decorations to the wall above a convector heater they flutter when the heater is switched on Why does this happen?

This happens because the heating wires heat up the air around them. This air is less denser than the surrounding, and so it rises up through the top of the heater. If the paper decorations are above the heater, they will definitely flutter because the air is coming through the top.


Why is there a metal grille on top of the heater?

The metal grille on top a heater has a few purposes. One reason is safety, to prevent you from touching the heater directly. Another purpose is that the grille acts as a shield to prevent things from burning or melting around the heater.


How does a convector heater work?

Inside an electric convector heater there is a large heating element similar to - but bigger than - one of the elements inside a bread toaster.When the electricity is switched on the element gets hot and heats up the air that is all around it.Because hot air is lighter than cold air, the hot air rises up and comes out, into the room, through the grilles at the top of the heater. Cold air from the room moves in through the grilles at the bottom of the heater to take the place of the hot air, and this process continues for as long as the heater is switched on.Any movement of air in that way - cold air taking the place of hot air moving up - is called "convection", which is why the appliance is called a convection heater.Electric fan heaters work in a different way: they have a powerful electric fan inside, which sucks in cold air from the room. The fan then blows the air through an electrically heated element and that hot air then comes out of the fan heater into the room.


What stove top grill do you reccommend?

There are many available stove top grill available online for purchase. One of the example of a good quality stove top grill is by the company Chefmaster.


Can i use my grill mat on electric stove top?

Cast iron grill will work on electric stove. A cast iron grill is heavy and typically has a flat bottom that promotes even. Since a cast iron grill is one solid piece of metal that typically has a handle as part of the design, it has no parts that can loosen or break.


Where is the heater control valve for 92 Toyota Camry?

Its on the driver side firewall connected between the heater hose. Its a metal valve with heater hose on both sides and a lever on top that connects to the temperature adjustment switch on the dashboard.


What are the main duties of a grill cook?

To cook things on the grill top.


How do you replace the low beam headlights on a 2006 Subaru Outback Wagon?

There are total of three metal/plactic screws/brackets. All of them are on top, two are visible, one is semiidden under the grill edge. Start with removing the grill and it will be obvious.


Why Heater on 2001 jaguar s-type not working?

1. low coolant 2. heater pump (below top radiator hose) should be buzzing while heater is on. 3. heater control valve (below heater pump) 4. in car temp sensor (above ign. key) try spraying air into grill intake to clean it 5. bring to jag expert


Why is an onion passed over a hot grill before grilling?

The onion is used to clean the surface of the grill top. Cut an onion in half, insert a fork in the top part of the cut onion and rub the cut side along the grill top, cleaning the entire grill. The grill should be very hot, and you can do this before and/or after cooking.