0
NFPA Ordinary Hazard Group 1 refers to a classification for fire protection purposes, particularly in the context of the National Fire Protection Association (NFPA) standards. This group includes occupancies that present a moderate fire hazard due to the presence of ordinary combustibles, such as wood, paper, and some textiles, but with limited quantities of flammable liquids or hazardous materials. Examples include offices, retail stores, and certain types of warehouses. The classification helps in determining the appropriate fire suppression systems and safety measures needed to mitigate fire risks.
What else can I help you with?
What are the automatic sprinkler requirements for an ordinary-hazard group 1 occupancy?
Ordinary Hazard Group 1 density is 0.15 gpm/sq ft over 1500 sq ft if wet pipe system Ordinary Hazard Group II density is 0.20 gpm/sq ft over 1500 sq ft if wet pipe system (according to NFPA 13) There are factors that can change the density and area requirements depending on variou sfactors, but in general the above densities/area are correct.
Is a parking garage a light hazard occupancy?
Automobile parking garage Ordinary Hazard Group 1
Match each NFPA 704 marking system description with the correct area on the NFPA marker.?
Fire Hazard: 2, Red square Special Information: 4 Health hazard: 1 Reactivity hazard: 3
Is church considered nfpa light hazard?
Probably not. NFPA 1 "Hazard of Contents" are defined as High (with 5 levels), Ordinary or Low. The only occupancies that have "low" rating are those primarily for storage of non-combustibles. A church is primarily an assembly occupancy and could not be rated as "low hazard", based upon the risks to numerous human occupants. Types of occupancies other than "storage", even if incidentally storing non-combustibles, would qualify as an "ordinary" hazard, under the theory that some combustible materials will be introduced or hazardous operations conducted, or some psychological factor introduced in case of any fire or other emergency, thus requiring at least "ordinary" fire prevention and means of egress.
What are the NFPA hazard diamond ratings for Sodium Hypochlorite 12.5 percent solution?
2-0-1-ox
What are the nfpa hazard diamond rating for solvent?
Health (Blue): 1 Flammability (Red): 2 Reactivity (Yellow): 0 Special (White): None
What is the NFPA diamonds for the compound cyclohexane?
Cyclohexane does not have a specific NFPA diamond classification since it is not considered a hazardous material under the NFPA 704 standard.
Which NFPA standard is for fire extinguishers?
NFPA 10 Standard for Portable Fire Extinguishers deals with them, among others. NFPA 1 National Fire Code tells you how many of each type of extinguisher you generally need. Other specific standards refer to specific types of hazards.
What is the maximum square footage of an ordinary 1 hazard?
In golf, there is no limit. Some hazards are naturally occurring so it would be pointless to have a limit on their size.
What article of the NFPA covers fire hydrants?
There are several NFPA standards that reference fire hydrant requirements, for various parameters, including NFPA 1 Fire Code and NFPA 101 Life Safety Code. You may also be interested in NFPA 291 Recommended Practice for Fire Flow Testing and Marking of Hydrants NFPA 25 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems or NFPA 1142 Standard on Water Supplies for Suburban and Rural Fire Fighting
What type of hazard does hazard class 1 material present?
Class 1 materials are explosives.Materials that have an explosive hazard are in Hazard Class 1.
Is arc flash safety analysis as described by NFPA 70e required by OSHA?
This is a very complicated matter, but as a practical matter the answer is "Yes." The analysis should be entrusted to an expert in NFPA 70E, OSHA regs, and Arc Flash Hazard Analysis. Arc Flash warning labels alert employees of the dangers they are about to encounter and inform them of the correct PPE. According to OSHA regional director Richard Terrill, "The employer is required to conduct an assessment in accordance with CFR 1910.132(d)(1). If an arc flash is present, or likely to be present, then the employer must select and require employees to use protective apparel. Employees who conduct the hazard/risk assessment, and select and require their employees to use protective clothing and offer PPE appropriate for the task, as stated in the NFPA 70E, are deemed in compliance with the hazard assessment and equipment selection OSHA standard."
