Yes, if your battery has the capacity to match the light bulbs requirements.
A 1.5volt "AA" battery cannot supply enough power to light a 60watt bulb. A flashlight that uses a single battery will have a bulb small enough to be powered by a small battery and a paper-clip as a conductor. A low voltage LED may also be used.
Touch one end of the battery to one terminal on the bulb, and connect the other end of the battery to the other terminal using the clip. (you may find it helpful to use tape to hold it all together)
A paper clip does not float on ethanol because the surface tension of ethanol is not enough to support the weight of the paper clip. Evelyn Biologist
No, picking up a paper clip with a magnet is not a physical change. It is a demonstration of magnetic force and involves no permanent alteration to the paper clip's structure or composition.
A paper clip is neutral or not magnetized and when you bring it to a north or south pole, the opposite little magnets in the clip are attracted to it. If it is kept in contact long enough, the clip will itself become magnitized.
A paper clip is typically made of steel, which has a Mohs hardness of around 5.5 to 6.5. Therefore, a paper clip would have a hardness of around 5.5 to 6.5 on the Mohs hardness scale.
Certainly, as long as the paper clips are made of iron or steel. Most paper clips are made of polished or zinc-plated steel. Magnetism is a field that is not affected by water or any intervening matter unless that matter is also magnetic, or ferromagnetic.
No, a paper clip cannot light a light bulb by itself. A paper clip does not produce heat or electricity on its own to generate light. You would need a power source such as a battery or electrical outlet to light a light bulb.
No, a magnet and a paper clip cannot light a bulb on their own. Light bulbs require an electrical current to produce light, which cannot be generated by simply using a magnet and a paper clip.
Take a Energizer, Duracell, etc. battery (the bigger the bulb the bigger the battery) and a paper clip. Bend up the paper clip to a pretty straight line, and attach one end to the end of the lightbulb. Attach the other end to one end of the battery, and POOF! Light! If the bulb doesn't come on try attaching the paper clip to the other end of the battery. If it STILL doesn't work, get a bigger battery.
Yes you do need a battery because the paper clip is usually used for an alternative for a wire and the paper clip is what the electricity travels through, so yes you do need a battery.
because the metal paper clip is conducted and it has energyand that how it lights up
because the metal paper clip is conducted and it has energyand that how it lights up
The things you need for your curcuit are: A light bulb, Bell wire, A Battery and a conducter ex. pin, paper clip Attach the bulb together with the battery using the bell wire. With the two ends of the wire connect to the conducter and see if light bulb comes on.
The metal paper clip will conduct electricity, so completing the circuit.
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
A circuit is complete
Right above the little paper-clip.
a copper penny a iron nail a metal clip battery light bulb a switch and many more