answersLogoWhite

0

- Dry potassium dichromate (standard certified quality, from NIST - SRM 136f or from another supplier), using a platinum dish or crucible. - Follow the mode of drying (generally 1 hour at 120 0C in an oven) indicated by the supplier. Place the potassium dichromate in an exsicator. - Prepare a volume of demineralized or distilled water - Weight 73,546 25 g potassium dichromate in a platinum dish calcined to a constant weight; apply a correction for the flotability of the air and the purity of the dichromate. Use a metrologically checked microbalance. - Place carefully the potassium dichromate in a 1 000 mL volumetric flask, dried and washed - Add about 900 mL water - Place the volumetric flask in a thermostat at 20 0C; after approx. 30 min add the water exactly to the mark. - Stirr the content of the volumetric flask; place a clear label on the flask (concentration, material, date of preparation, operator's name).

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Earth Science

How do you make 0.25N K2Cr2O7 solution?

To prepare a 0.25N K2Cr2O7 solution, you would dissolve 12.43 grams of K2Cr2O7 in enough water to make 1 liter of solution. This will give you a molarity of 0.25N for potassium dichromate (K2Cr2O7) in the solution.


How do you make a potassium thiocynate solution?

To make a potassium thiocyanate solution, first dissolve potassium thiocyanate powder in distilled water. Stir the mixture until the powder is completely dissolved. The resulting solution can be used for various chemical reactions or experiments.


How do you make potassium thiocyanite solution?

To make a potassium thiocyanate solution, simply dissolve potassium thiocyanate powder in distilled water until the desired concentration is achieved. Stir the solution until the powder is completely dissolved. Take proper safety precautions as potassium thiocyanate can be harmful if mishandled.


How will you prepare the 1 molar potassium acetate solution?

You have to dissolve 1.00 mol, that is 98.15 g CH3COOK (its molar mass being 98.15 g/mol), in upto 1.000 L.(Suggested procedure: dissolve 98.15 g CH3COOK in not more then 900 mL, homogenize and fill up to exactly 1.000 L by carefully adding the last millilitres water).


How do you make a 1 percent aqueous solution of potassium hydroxide?

To make a 1% aqueous solution of potassium hydroxide, you would mix 1 gram of potassium hydroxide with 99 grams of water (for a total of 100 grams solution). This would give you a solution where 1% of the total weight is potassium hydroxide.

Related Questions

How do you make k2cr2o4 solution?

It is prepared by roasting powdered chromite with potash and limestone, treating the cinder with a hot potassium sulfate solution and leaching.Alternatively, it may be prepared by the reaction of potassium dichromate and potassium hydroxide.


How prepare 0.1 n k2cr2o7?

To prepare a 0.1 N solution of K2Cr2O7 (potassium dichromate), you would need to dissolve 4.903 grams of K2Cr2O7 in enough water to make 1 liter of solution. Weigh out the exact amount of K2Cr2O7 using a balance, then dissolve it in water and make up the volume to 1 liter. This will give you a 0.1 N solution of K2Cr2O7.


How do you make 0.25N K2Cr2O7 solution?

To prepare a 0.25N K2Cr2O7 solution, you would dissolve 12.43 grams of K2Cr2O7 in enough water to make 1 liter of solution. This will give you a molarity of 0.25N for potassium dichromate (K2Cr2O7) in the solution.


What elements make up K2Cr2O7?

Potassium dichromate contain potassium, chromium and oxygen.


How do you prepare one normal solution of potassium nitrate?

To prepare one normal solution of potassium nitrate, you would dissolve 101.1 grams of potassium nitrate in enough water to make 1 liter of solution. This solution will have a concentration of 1 mole per liter, which is considered a normal solution. Make sure to use a balance to accurately measure the mass of potassium nitrate and a volumetric flask to ensure a final volume of 1 liter.


Is there any way to make lead chromate?

by the reaction of lead nitrate with potassium chromate or potassium dichromate


How do you prepare 4N potassium chloride?

To prepare 4N potassium chloride solution, dissolve 149.5 g of potassium chloride in 1 liter of water. This will give you a solution with a concentration of 4N. Make sure to use a balance to accurately measure the amount of potassium chloride needed.


How do you prepare standard solution of potassium dichromate to compare icteric index of serum?

for preparing 0.1 normal solution of potassium permanganate you have to disssolve 3.16 g potssium permangnate in 1L water bt in alkaline or neutral medium reactions of potassium permanganate is different and Mn gains 3 electrons in redox reaction,so far alkaline medium redox titration equivalent wt of KMnO4 will be 158\3=52.6.so far,0.1 N KMnO4 in alkaline medium redox titration dissolve 5.26 g in 1L sol.


How do you prepare 1 N potassium dichromate?

prepare a concentrated aqueous solution of di chromate and add solid KOH warm till orange colour change to yellow and then filter the solution the filtrate is allow to evaporate and get solid potassium chromate.


Sulfuric acid and potassium dichromate in ethanol make?

When sulfuric acid and potassium dichromate react in ethanol, they form chromium(III) sulfate, potassium sulfate, water, and carbon dioxide. This is a redox reaction where the dichromate ion is reduced to chromium(III) while sulfuric acid is acting as a catalyst. The products will vary depending on the specific conditions of the reaction.


How do you make 0.5 M potassium dihydrogen orthophosphate?

To make a 0.5 M solution of potassium dihydrogen orthophosphate (KH2PO4), you would need to weigh out 13.5 grams of KH2PO4 and dissolve it in water to make 1 liter of solution. Be sure to use a balance to accurately measure the amount of KH2PO4 needed for the desired molarity.


How do you make a potassium thiocynate solution?

To make a potassium thiocyanate solution, first dissolve potassium thiocyanate powder in distilled water. Stir the mixture until the powder is completely dissolved. The resulting solution can be used for various chemical reactions or experiments.