Take Fecl2 as per your desired molarity and then add it to .1 molar HCL solution. keep it on magnatic sterier for over night. for better result perform the whole experiment under an oxygen free nitrogen atmosphere
Dissolve 0,1622 g anhydrous ferric chloride in 0,9 L demineralized water in a clean, dried volumetric flask, in a thermostat at 20 0C; when the temperature is stabilized add water to the mark and stir.
Basalt is 1mm
First write the reaction, get moleculr weight of oxygen and reactant. TOD=(mg/L soln)X(weight of O)/(weight of Reactants)
1mm of rain is actually water volume of 1lt per 1m2 of surface, 1mm=1lt/1m2 explanation: Simply convert 1lt to 1000 ml. Since 1ml=1cm3 and 1cm=0.01m=10-2m then 1cm3 = 10-6m3 this means that 1lt=1000ml=1000cm3 = 1000 x 10-6m3= 10-3m3 So 1lt/1m2 from the above is 10-3m3/1m2= 10-3m = 1mm. I hope that it is not complicated.
Peat forms at about 1mm per year.
One point of rain = 0.25 mm or 1mm = 3.9points
for prepare 1mM DPPH radical solution: DPPH Molecular weight: C18H12N5O6 = 394g DPPH 1mM = 394/1000= 0.394g/L
0.1M is 1/10 molar whereas 1mM is 1 millimolar and thus 1/1000 molar. There is thus a 1:100 dilution. So 10:1000 would be the same. To a 1000ml volumetric flask, pipete 10mls of 0.1M EDTA solution. Make up to the mark with deionized water. Mix and shake and you will have 1000mls of 1mM EDTA solution.
You dilute it 1:10, then you take 1 part of that solution and mix it with 9 parts of the diluent. That will make the 1:100 dilution you need, incl. prevention of pipette inaccuracy.
0,4 g NaOH + 1000 ml H2O
1mM DPPH (MW 394.32) solution would be 0.39 mg/1mL 1M = 390 mg/1mL
The pasta dough is made, then rolled through a pasta machine, which rolls it out to about 1mm thick. The pasta is then cut into shape.
1mm 1mm
Define the measurement
1mm converts to 0.000001km
If the circle has a RADIUS of 1mm then about 3,14 mm2 If the circle has a DIAMETER of 1mm then about 0,785 mm2
1MM in dollars is 1M=1K dollars 1MM=1Million dollars 1MMM=1Billion dollars
The volume will be 1mm cube. It is calculated by 1mm*1mm*1mm.