0
What else can I help you with?
How much distilled water should be used to dissolve 3.33 g of silver nitrate?
It depends on the strength of the solution you want. 3.33g of AgNO3 is 0.0196 moles. Ish. So from there, you need to work out how much water is needed to create your required strength. 1.42 moles of silver nitrate is the maximum you can dissolve in 100g of water.
How many molecules are there in 65 g of silver nitrate?
Well, because you have 65g of AgNO3, you have .3826 moles of silver nitrate. This is found by dividing the number of grams you have by the molar mass of silver nitrate (169.9g/mol). Once you know how many moles there are you can then multiply by Avogodro's number (6.022x1023) to obtain the number of molecules. In this case it is 2.304x1023 molecules.
If copper is sold at 19 cents an ounce and silver is sold at 16.70 an ounce how many dollars worth of copper are required to produce 100 of silver by reacting it with silver nitrate?
To produce 100 silver with silver nitrate, you need 100 ounces of silver. 1 ounce of silver costs $16.70, so 100 ounces would cost $16.70 x 100 = $1670. To calculate how much copper is needed, divide the cost of silver by the cost of copper per ounce: $1670 / $0.19 ≈ 8789.47 ounces. Therefore, you would need approximately $1670 worth of copper to produce $100 worth of silver.
How could you make a pure sample of solid silver chloride starting with silver nitrate solution?
Add hydrochloric acid to silver nitrate and stir well to ensure it is all reacted. Silver chloride will precipitate out and is fairly insoluble. Filter the solution and collect the filtrate on the filter paper. Rinse a few times with water to wash off the excess acid. Dry the filtrate in the oven. The result is pure silver chloride. Note this is sensitive to UV light, so this is best done in a dark room under a red lamp.
How many grams of silver chloride are formed when 10.0 g of silver nitrate reacts with 15.0 g of barium chloride?
To find the limiting reactant, we need to determine how many grams of silver chloride can be produced from each reactant and compare the results. Calculate the amount of silver chloride that can be produced from 10.0 g of silver nitrate. Calculate the amount of silver chloride that can be produced from 15.0 g of barium chloride. The reactant that produces the lesser amount of silver chloride will be the limiting reactant.
How mack to 0.1NAgno3?
To make You need the molar mass of Silver nitrate to make 0.1 Silver Nitrate.
How many grams of silver nitrate is needed to make 275ml of a 0.567m sollution of silver nitrate?
You need 26,49 g silver nitrate.
How do you make silver nitrate from powder?
To make silver nitrate from powder, you would need to dissolve silver oxide or silver metal in nitric acid. The reaction produces silver nitrate and water. Make sure to use appropriate safety precautions when working with nitric acid, as it is corrosive and can be hazardous.
HOW DO YOU PREPARE 0.02N SILVER NITRATE?
To prepare 0.02N silver nitrate solution, you need to dissolve 0.17g of silver nitrate (AgNO3) in 1 liter of solution to make a 0.02N solution. Measure the amount of silver nitrate accurately using a balance and dissolve it in distilled water to make the final volume up to 1 liter. Stir well to ensure complete dissolution.
How many grams of silver nitrate are needed to react with 50 grams of sodium chloride?
You need 145,337 g silver nitrate.
How much distilled water should be used to dissolve 3.33 g of silver nitrate?
It depends on the strength of the solution you want. 3.33g of AgNO3 is 0.0196 moles. Ish. So from there, you need to work out how much water is needed to create your required strength. 1.42 moles of silver nitrate is the maximum you can dissolve in 100g of water.
How do you prepare 0.0141 N silver nitrate solution?
To prepare a 0.0141 N silver nitrate solution, you would need to weigh out the appropriate amount of silver nitrate based on its molar mass and dilute it in a known volume of water to make the final solution. Ensure to use a balance for accurate measurement and follow proper safety measures when handling chemicals.
What elements need do create silver?
Because silver is an element, it cannot be create. It can be converted from other substances containing silver though (Silver nitrate...)
How many molecules are there in 65 g of silver nitrate?
Well, because you have 65g of AgNO3, you have .3826 moles of silver nitrate. This is found by dividing the number of grams you have by the molar mass of silver nitrate (169.9g/mol). Once you know how many moles there are you can then multiply by Avogodro's number (6.022x1023) to obtain the number of molecules. In this case it is 2.304x1023 molecules.
NEED help writing a chemistry equation Please help A copper coin was kept in the solution of silver nitrate after sometime when it was taken off?
You need to give more information. What color was the coin after the reaction, and did the silver nitrate solution change color?
How many moles of silver chromate will be formed when a silver nitrate solution of known concentration is added to a specified volume of potassium chromate solution of the same concentration?
The number of moles of silver chromate formed will depend on the stoichiometry of the reaction between silver nitrate and potassium chromate. You need to know the balanced chemical equation, as well as the exact volumes and concentrations of the silver nitrate and potassium chromate solutions to calculate the number of moles of silver chromate formed.
What is the process for the extraction of silver nitrate from photographic waste?
To extract silver nitrate from photographic waste, you can use a process called electrolysis. This involves passing an electric current through a solution containing the waste material, causing the silver ions to be attracted to the negative electrode and reduced to silver metal. The resulting silver can then be collected and further refined if needed.
