The idea is to line up the electrical fields of the atoms, and to do that you have to stroke in one direction or the other. However, whether you stroke left to right or right to left doesn't matter.
The stroke method is a mechanical process used to magnetize materials. It involves stroking a magnet along a particular material in a specific direction to align the atomic domains within the material and induce magnetism. This method is commonly used to create temporary magnets.
When a magnet is weak, you can do three things to try to recharge it. You can rub a stronger magnet across its surface, you can stack them tightly and in the same alignment, or you can place it on something that floats in water, remove it and strike it with a hammer. These methods are not guaranteed to work.
First, grab an iron nail. Next, grab a bar magnet. Stroke the iron nail with the bar magnet at least 20 times. You can increase the strength by stroking it more. Now, bring the iron nail near some paper clips. It attracts them! Science is cool!
Eating plenty of calcium-rich foods may not necessarily directly reduce the risk of stroke. However, maintaining a balanced diet rich in calcium can contribute to overall heart health and reduce the risk factors for stroke, such as high blood pressure and cholesterol levels. It is important to focus on a variety of nutrients and a healthy lifestyle for stroke prevention.
A piece of any magnetic material, like iron or steel (a nail, knitting needle, bolt etc.) is take and placed on a bench or a table. A bar magnet is brought close to the magnetic material (say an iron piece AB). One end of the bar magnet is stroked against it, moving from end A to end B of the iron piece. When the bar reached end B, it is lifted and the stroke is repeated from A to end B. This procedure is repeated several times, keeping two things in mind: (a) The same pole of the bar magnet should be used every time (b) Strokes should be in the same direction By stroking the iron piece with the north pole of the bar magnet, end A becomes the North Pole, and end B the South Pole. If you bring the South Pole of any magnet close to end A now, what will you observe? You will observe that the two attract, which simply proves that end A acquires the North Pole.
if you are magnetifying a needle you must stroke it in the what diction
There are several ways. 1. Stroke the needle in one direction, with another magnet. 2. Place it in a coil of wire and pass a large (DC) current through the coil for a few seconds. (This is how they would do it commercially) 3. Align the needle with the magnetic north/south direction, now hit it several times. It will eventually take on the earths magnetic field as it's own.
Repetitively stroke a pin which CID attracted to the magnet in 1 direction for two minutes (stroke, lift, back, down, stroke, etc.). Stick the needle in a cork and put it in some water - one end will point north and the other south.
rub against needle with strong magnet i guess 1. Hold a needle by the eye and stroke it gently 30 times with your magnet, in the same direction. Do the same with the second needle, making sure that you use the same end of the magnet. 2. Test your needle-magnets on some pins before you use them for other experiments.
You would need a piece of cork or other soft floating material, perhaps polystyrene, also a needle and a magnet. stroke the needle with the magnet a few times in the same direction and them insert the needle into the floater so that it is horizontal when the floater is placed in water, place floater into a container of water, the needle will point toward the magnetic north.
stroke it one vay repeatedly against a magnet
The simple solution is to 'stroke' the NORTH pole of a bar magnet along the needle from north to south - about 30 strokes should do it.
it becomes magnetic :)
If your a homosexual... no!
its a 4 stroke they have always been 4 strokes
a stroke can cause death, but it will not always kill a person
The paralyzed part doesn't feel any pain.