They make the living organisms dead.
Spring acid shock can have detrimental effects on aquatic organisms by increasing the acidity of the water, which can disrupt their physiological functions, inhibit growth and reproduction, and potentially lead to mortality. It can also impact the availability of essential nutrients and disrupt food chains within the aquatic ecosystem.
1) This spring hub arrangement dampens torsional vibrations from the engine. 2) It also absorbs shock loads imposed on the drive line by sudden or violent clutch engagement. by akray
"It is an inert gas for one reason, it is also larger than a molecule of air, so it has a harder time leaking out." Also, when the oil inside of a shock/strut heats up it can foam (this is called aeration), the nitrogen gas prevents this from happening.
You hear thunder after seeing lightning because lightning produces intense heat that causes the air to rapidly expand and create a shock wave. This shock wave is what we hear as thunder. The distance between you and the lightning strike can affect the time gap between seeing the lightning and hearing the thunder.
A main shock is the largest earthquake in a sequence of earthquakes that occur in a specific region and time period. It is usually followed by aftershocks, which are smaller earthquakes that happen in the same area. The main shock can cause significant damage and is often used as a reference point for measuring the intensity of earthquakes in that sequence.
Spring acid shock can have detrimental effects on aquatic organisms by increasing the acidity of the water, which can disrupt their physiological functions, inhibit growth and reproduction, and potentially lead to mortality. It can also impact the availability of essential nutrients and disrupt food chains within the aquatic ecosystem.
Aquatic Shock
Compress the shock spring with a spring compressor. Be very careful as the spring will be under several hundred pounds of pressure. Remove the shock bolts on both ends of the shock. Reverse the process to install the new shock.
Aquatic Shock
Compress the shock spring using a spring compressor. Remove the bolt on top of the shock plate. Remove the bolt on the bottom of the shock. Reverse the process to install the new front shock.
a coilover..
The rear shock spring will need to be compressed with a spring compressor. When the spring is compressed the top nut can easily be removed.
You have to take the whole strut assembly off (shock and spring). Then with a spring compressor on the coil spring, take the top nut off the strut shaft and take the spring off. Once the spring is off the whole strut assembly is replaced which will contain a new shock. Then you already have the spring compressed, so you put the old spring on to new strut (shock) put the top back on, release the spring and tighten the nut. You have to have a vise to clamp the strut into to replace the strut body.
A strut is a combination of a shock absorber and a coil spring
the function of shock absorber is to prevent the coil spring or the spring bar to move freely or to prevent them to bounce as it is.that is why they put shock absorber to have a good riding comfort depends on the road condition
The coil spring provides suspension and absorbs shock.
they shock it